Swapped dual USB A hub to USB C

[Pau1ey]

Just realized I posted on Reddit but never here: All you do on the XC60/XC90 (maybe wagons/sedans versions) is carefully lift up with a trim tool flat screwdriver from the bottom center of the hub, it’s held in by plastic tabs so it pops out, and just swap the plug over and snap it back in. The car will immediately recognize it and works exactly as before. I had swapped mine because the ports were loose on the original causing CarPlay to disconnect often. After testing it worked perfectly so there was no good reason to replace it with the same ancient USB A type.