12-08-2023, 10:24 PM
(This post was last modified: 01-11-2024, 12:39 PM by STWAGguy.
Edit Reason: Updated info
)
Below are some settings that I’ve tested on my car, a US-spec 2023 V60 Polestar Engineered. This may provide a good starting point for new Orbit users with a 2023 or 2024 US spec S60, V60 or XC60 Polestar Engineered cars. I’ve not included any LED headlight settings since I preferred the US default headlight configs.
#025 SEAT HEAT CALIBRATION: OEM setting ="6"; I set mine to 1 to lower seat temps, but anything above 6 should raise the seat temps for each of the three heating levels
#068 PANIC FUNCTION: (key button) Set to Function only with light verses light and sound
#121 HEADLIGHT CLEANING OPTION: I’m leaving this at the default for the winter months but will set to "Without Headlight Cleaning" in the spring
#144 DISTANCE ALERT: This eliminates the amber "too close" icon in the drivers display
#158 HEAD UP DISPLAY… UNCHANGED - I tried several and they looked similar but OEM "Graphic 3" setting was required to retain the google turn by turn info
#159 SAFETY BELT REMINDER: Set to Belt Minder front seats only, EU logic to let me start the car before belting up
#323 REAR AUTOMATIC EMERGENCY BRAKING: Set to 01, Without Braking (needed for reversing out of my garage without the car occasionally panic stopping); Disable button still comes up on screen when reversing but I've confirmed that the auto rear braking function is disabled
#359 EXTERIOR SOUND: Set to Not Available to shut off low speed and reversing EV sounds - Must also use #371 as 359 does nothing by itself
#371 EXTERIOR SOUND SYSTEM: Set to "Without" and use with #359. Used by itself it will work, but will generate DTC and error message on startup (same as removing the external speaker fuse)
Edit: The external sounds could no longer be disabled after the 2.13 SW update via these settings alone, but as a workaround you can still remove the fuse and not get the “External Sound Malfunction” message each time you start the car
#025 SEAT HEAT CALIBRATION: OEM setting ="6"; I set mine to 1 to lower seat temps, but anything above 6 should raise the seat temps for each of the three heating levels
#068 PANIC FUNCTION: (key button) Set to Function only with light verses light and sound
#121 HEADLIGHT CLEANING OPTION: I’m leaving this at the default for the winter months but will set to "Without Headlight Cleaning" in the spring
#144 DISTANCE ALERT: This eliminates the amber "too close" icon in the drivers display
#158 HEAD UP DISPLAY… UNCHANGED - I tried several and they looked similar but OEM "Graphic 3" setting was required to retain the google turn by turn info
#159 SAFETY BELT REMINDER: Set to Belt Minder front seats only, EU logic to let me start the car before belting up
#323 REAR AUTOMATIC EMERGENCY BRAKING: Set to 01, Without Braking (needed for reversing out of my garage without the car occasionally panic stopping); Disable button still comes up on screen when reversing but I've confirmed that the auto rear braking function is disabled
#359 EXTERIOR SOUND: Set to Not Available to shut off low speed and reversing EV sounds - Must also use #371 as 359 does nothing by itself
#371 EXTERIOR SOUND SYSTEM: Set to "Without" and use with #359. Used by itself it will work, but will generate DTC and error message on startup (same as removing the external speaker fuse)
Edit: The external sounds could no longer be disabled after the 2.13 SW update via these settings alone, but as a workaround you can still remove the fuse and not get the “External Sound Malfunction” message each time you start the car