08-19-2023, 01:09 AM
New features:
New service features in BETA - Must request to be enabled until they are released for all! (contact support e-mail to enable)
Fixes:
- New Config Presets added for options for Tow Bar, TPMS, Cruise Control/Pilot Assist. OrBit reads car information and chooses the "best" settings based on Volvo configs for PA equipped cars with the same equipment.
- PIN Finder Replaces the old "PIN From log" tool. PIN Finder will find and crack all interesting PINs from the same inputs (VIDA log or wireshark capture). In addition to CEM and VGM PINs, PIN Finder will crack other unique PINs found and display all PINs found in a report format.
New service features in BETA - Must request to be enabled until they are released for all! (contact support e-mail to enable)
- Park Camera (360 cam) Learning and Calibration - Starting Calibration or Learning for the Parking cameras, monitor status real time while driving to confirm calibration state
- Brake Service for "Vacuumless" brake system - Enable Bleed mode, run Bleed check and Leakage check tests, enable EPB service mode for pad replacement.
- Air Suspension Calibration - Prepare, measure and calibrate 4 corner air suspension. "Raise" or "Lower" option included to customize the calibrated height of the suspension.
- Key fob programming - Add or delete key fobs from cars with "keyless" operation. Any compatible key fob can be added, used or new. This currently requires obtaining the "security PIN for the CEM". PIN extraction is being developed. Users will be accepted to beta test key programming based on the need for information and testing on various models of CEM. I will make a separate post about beta testing key fob programming!
Fixes:
- Added support for 2024 models with new CEM hardware.
- Fix application hang when uploading logs
- Fix some programming reconnection issues due to Windows/PC behavior
- Fix issues reading VIN from car when the response is slow
- Speed and reliability improvements in flashing process
- Error messages improved for flash fail: which ECU not responding, reconnection timer to identify PC issues
- Other improvements - I've lost track of all the other but there are many fixes and improvements