"A car is found but it is not responding to connection request"

[Zurginator]

Howdy,

I've recently been trying to connect to my Polestar 2 to clear some error messages I caused, but I can't get Orbit to connect anymore. Worth pointing out that I have previously connected and installed modules using this exact combination of laptop/ethernet/cable. I have even tried rolling back to a known working version of Orbit, but I keep getting the same error:

"A car is found but it is not responding to connection request"

I've tried deep sleep on the car, pulling the TCAM battery + 12v, adding a firewall exception, completely disabling the Windows firewall, using an old 'known-working' version of Orbit, using the latest version of Orbit...

I'm out of ideas. Suggestions?

[Braxia]

Have you tried restarting the laptop? Also is it a direct lan connection or via dongle/usb?

[Zurginator]

Have you tried restarting the laptop? Also is it a direct lan connection or via dongle/usb?

Multiple times, and also different ports. I'm using a dongle, same one I used previously - it stays connected to the cable.

[jos]

Try to remove the network hardware from devmgmt.msc reconnect it at a new adapter will be installed with the default settings, then try again.

I assume its a windows device.


Best Regards JOS