Wireless Charger install on 2017
#41
Hi!

I have now tested to program with button and it works fine for me. (As seen earlier in the thread i have retrofitted a new center console with charge in front of the gear selector, added LIN wire from CEM in my XC60 MY2020)
Reply
#42
(10-20-2025, 05:07 AM)thermal-fixity Wrote: Still WIP, tremendous amount of work to install the wireless charger - the whole centre console had to be taken out… There’re 2 screws that hold the trim around the cup holders that are only accessible from the buttom

Hi, good afternoon. Do I really need to remove the entire center console to install the charger?
Reply
#43
(12-24-2025, 02:23 PM)Percy Wrote: Hi!

I have now tested to program with button and it works fine for me. (As seen earlier in the thread i have retrofitted a new center console with charge in front of the gear selector, added LIN wire from CEM in my XC60 MY2020)

Nice!

Really curious to know more about your experience, I've run the wire and coded but my charger does not work. A couple of questions:
Quote:Nazsky786:
CEM. FL 41
 Brown Connector Large.
If you have IHU 3.2 you can enable the on off switch option in Orbit and it will display a wireless charging icon. 
Pin is normally there, some work, some dont.
1. Is this the wire you ran? Anything else needed?

2. What options did you code?

(02-21-2026, 06:51 PM)Marcp Wrote:
(10-20-2025, 05:07 AM)thermal-fixity Wrote: Still WIP, tremendous amount of work to install the wireless charger - the whole centre console had to be taken out… There’re 2 screws that hold the trim around the cup holders that are only accessible from the buttom

Hi, good afternoon. Do I really need to remove the entire center console to install the charger?

yeah, that was my experience. I don't think there is a way around it
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)