Central lock switches rear doors V60

[TweakeNL]

My car did not have the switches in the rear door for the central lock.
You can add them easily as, at least with my car, they are pre wired. The connector was behind the door panel.

   

Add the switches and plug in the connector. Then change the following config bit:

086 Central Lock Switches: 03 Central Lock Switches in both front doors and switches in both rear doors.

Aaand it works 

[Henk{GP}]

Did you try to find the setting for child-lock as well?
BR

[andyliwei]

may I know which model year of your v60? my v60 also doesn't come with rear door swithes, but I can't see the pre-wired cable behind the grill.

[x119]

Now I wonder if this is similar for the automatic child lock switch... will see if I can get one on eBay.

[Sodertalje]

may I know which model year of your v60? my v60 also doesn't come with rear door swithes, but I can't see the pre-wired cable behind the grill.

You have to take the door panel off to see the connector.

[andyliwei]

may I know which model year of your v60? my v60 also doesn't come with rear door swithes, but I can't see the pre-wired cable behind the grill.

You have to take the door panel off to see the connector.

I found it, but rear left door button only lock single door, is it correct?

[TweakeNL]

may I know which model year of your v60? my v60 also doesn't come with rear door swithes, but I can't see the pre-wired cable behind the grill.

You have to take the door panel off to see the connector.

I found it, but rear left door button only lock single door, is it correct?

Jep, correct.

[Sodertalje]

I fitted 2 rear door switches from a XC90, and although they fit perfectly, they do not function. Do you have part numbers for the ones that fit V60?

[Liven]

I fitted 2 rear door switches from a XC90, and although they fit perfectly, they do not function. Do you have part numbers for the ones that fit V60?

I think the part is general module for all model，i check v60 park no.

[paunionutz]

I fitted  switches in my V60 rear doors, but on the right side is not working. I put the switch in the left side and the switch is ok.  The sitch is not illuminated,  it does nothing on the right side. Any ideea?
LE: i found the problem! The robot who made the wiring loom, didn't install corect pins in the connector. Instead of 1234, in my case was 5432 only in this connector. I inserted the pins corect, and now is working