Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hands-free tailgate/trunk open
#11
I started the installation on V60 2020.

[Image: IMG-20240818-150316.jpg] [Image: IMG-20240818-150326.jpg] [Image: IMG-20240818-150331.jpg]
Reply
#12
I connected the foot sensor. Changed the configuration. There are no errors in the blocks. It doesn't work. I don't have keyless entry. Will it work?
What did I do wrong?

[Image: 2024-08-26-154857-2.png]
Reply
#13
As far as I know, it does not work without the keyless entry.  The cars with keyless entry, there is an antenna in the trunk behind the plastic cover inside the trunk under the locking hatch.    but it's easy to test. 
I tested with my car; I unlocked the car first and left the key inside the house. I went to trunk and tried to open it with the foot sensor and it did not work but I could open the trunk by using the button on the top of the license plate while the car was still unlocked.
Reply
#14
(08-26-2024, 05:20 PM)IMAY2023 Wrote: As far as I know, it does not work without the keyless entry.  The cars with keyless entry, there is an antenna in the trunk behind the plastic cover inside the trunk under the locking hatch.    but it's easy to test. 
I tested with my car; I unlocked the car first and left the key inside the house. I went to trunk and tried to open it with the foot sensor and it did not work but I could open the trunk by using the button on the top of the license plate while the car was still unlocked.

Thank you. It works for me too. I'm going to install keyless entry.
Reply
#15
Installed Keyless Entry. Opening with foot worked. Signal is connected correctly.
Reply
#16
(09-16-2024, 08:24 AM)Aliaksandr Wrote: Installed Keyless Entry. Opening with foot worked. Signal is connected correctly.

How did you install keyless entry?
Reply
#17
(09-16-2024, 09:14 AM)vcorusa Wrote:
(09-16-2024, 08:24 AM)Aliaksandr Wrote: Installed Keyless Entry. Opening with foot worked. Signal is connected correctly.

How did you install keyless entry?

We have a big thread here. https://forums.spaycetech.com/showthread.php?tid=152
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)