Hi all,
After buying several wrong parts and trying to find all the information in one spot and failing, here is a definitive guide with part numbers to retrofitting the factory reversing camera. This is just the rear one, not the 360 cameras.
This is for a 2022 R-Design with Sensus
Parts Needed:
-Tailgate handle (with camera hole) Pt No: 32310006
-Camera Pt No: 32286680
-Loom Pt No: 31650607
The install instructions can be found here: Parking assistance, camera, rear - XC40 2022 - Volvo Cars Accessories
The hardest part is getting cable through the boot(trunk) cable glands. After this, just run the loom, I managed to do it without taking all the trims off. Just find a way to run the loom to the centre console. Once there, I managed to put a long allen key to pull of the trim(the bit with the volume knob) its stiff, but will come. Once there, plug the loom into the correct socket.
Once all connected, go to Orbit, and activate 154. Then option 09 'Camera Gen 2 Always in Reverse''
Hope that helps!
After buying several wrong parts and trying to find all the information in one spot and failing, here is a definitive guide with part numbers to retrofitting the factory reversing camera. This is just the rear one, not the 360 cameras.
This is for a 2022 R-Design with Sensus
Parts Needed:
-Tailgate handle (with camera hole) Pt No: 32310006
-Camera Pt No: 32286680
-Loom Pt No: 31650607
The install instructions can be found here: Parking assistance, camera, rear - XC40 2022 - Volvo Cars Accessories
The hardest part is getting cable through the boot(trunk) cable glands. After this, just run the loom, I managed to do it without taking all the trims off. Just find a way to run the loom to the centre console. Once there, I managed to put a long allen key to pull of the trim(the bit with the volume knob) its stiff, but will come. Once there, plug the loom into the correct socket.
Once all connected, go to Orbit, and activate 154. Then option 09 'Camera Gen 2 Always in Reverse''
Hope that helps!