VOC (Volvo On Call) removing

[Steffe]

That's what I've heard as well.

[McNight]

I dont know how but I diseable IT using Orbit! Finally!!

[kuwerty]

I dont know how but I diseable IT using Orbit! Finally!!

Can you please share any more info how did you manage thay and list changes you did in the config?

[Beagle]

Please share changed list. It would be big help for many people.

[McNight]

---

Sorry, False Alarm! Again Pop out! :/ but I still fighting!

---

[McNight]

I don't know what happened, but my two-year-old daughter was playing in the car and messed up all the settings (she might have restored the factory settings); I haven't had that error for two weeks now. (VOC and VCM-U105000) LOL

[jos]

So everybody seems to need a young daughter which needs to be placed in the car for a while :-)

[FastWgn]

PSA for people that do this.
As most know by now - you need to use VIDA and the software update called 32398268 to reset the counter for the VCM battery life. Doing so also removed the U105000 error in the VCM when you scan using Orbit or VIDA. That is - unless you are super lucky and Orbit can use the factory default code for the VCM. I tried that first and no luck.
For me - two things happened after the software was applied
1. Lost connectivity with the car, and the only way to get it back was by doing a hard reset of the VCM. That is, remove the freshly installed battery, as well as ground for the main battery, wait a few minutes and then reconnect (main battery first, then install the VCM fresh battery again).
2. All tweaks done to the car (TPMS, Adaptive lights, tire circumference, doors autolocking etc) were gone. The ability of Orbit to load a saved configuration file was awesome! Saved me a lot of time remembering what I had done previously. So - when ever you do a chance to your car in Orbit and like it - save a copy of your configuration!

[x119]

PSA for people that do this.
As most know by now - you need to use VIDA and the software update called 32398268 to reset the counter for the VCM battery life. Doing so also removed the U105000 error in the VCM when you scan using Orbit or VIDA. That is - unless you are super lucky and Orbit can use the factory default code for the VCM. I tried that first and no luck.

OrBit can do this exact action, it's not software, it's simply a diagnostic command. You however do need you level 11 PIN. As you mention, some are set to default PIN and then it's super easy. Otherwise support can help you with your PIN for this action for a fee.