Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Homelink settings?
#1
Hey,

I see the following settings:
078 HOMELINK FREQUENCY SETTING

Did anyone play with it?

I can't get my US Volvo linked with my garage doors in Europe, assume it's a frequency thing.

There are 9 options.. maybe just have to go through them one by one..

Cheers

Edit: found this had already been discussed here:
https://www.swedespeed.com/threads/new-b...ad.664211/
Reply
#2
So which one have you used?

I cannot get my Sommer TX03-868-4 working with Homelink with my retrofitted Volvo mirror. Sad

I had a normal autodim mirror before without a compass.
Are there any other options that need to be enabled, beside one of the frequency settings for 078? Americans have Homelink 5 setting as I've read from swedespeed forum, but what is in EU?

Can anyone send me a config list privately who has factory-ordered original Homelink mirror (part no. 32219072) in the car?
Reply
#3
(11-10-2023, 07:46 PM)volvoPS4K Wrote: So which one have you used?

I cannot get my Sommer TX03-868-4 working with Homelink with my retrofitted Volvo mirror. Sad

I had a normal autodim mirror before without a compass.
Are there any other options that need to be enabled, beside one of the frequency settings for 078? Americans have Homelink 5 setting as I've read from swedespeed forum, but what is in EU?

Can anyone send me a config list privately who has factory-ordered original Homelink mirror (part no. 32219072) in the car?

Bumping! I am also looking for some examples of 078 setting from cars in EU. What we know so far is that the US market cars have the 078 HOMELINK FREQUENCY SETTING at "06 Homelink 5". Can any of you folks out there in EU check your setting and share? Smile
Reply
#4
Just in case someone is interested in retrofitting homelink. I intalled a used mirror with autodimm and homelink and got it working. The mirror is from US. The car is located in EU (My23). I set the checkbox to show all configurations to see the homelink settings. One option I changed from "without homelink" to "with homelink" (can't remember the number) and the option 078 to "homelink7". Homelink 7 was my first approach and it worked. I selected option 7 because I need homelink version 7 or newer... I could program my fixed key sender after writing the changes to the car.
Reply
#5
I've also retrofitted the mirror with homelink but the version 7 doesn't work for me.
My garage door is on 433.92 Mhz. Anyone has a table with with that version i need to select for this freq ?

Thanks !
Reply
#6
Today tried a little bit to play with Homelink settings. Unfortunately, had not so much time, so not all settings are checked. That's what I was able to discover:


078 HOMELINK FREQUENCY SETTING:
01 Without homelink
02 Homelink 1
03 Homelink 2
04 Homelink 3
05 Homelink 4
06 Homelink 5 - 434 MHz
07 Homelink 6 - 434 MHz
08 Homelink 7 - 434 MHz
09 Homelink 8 - 320MHz
0A Homelink 9 - 320MHz

Homelink1 is some kind not standard frequency, had no time to play with... Sad
Reply
#7
How did you managed to find the frequencies for the different settings ? Is there something i can do ? I have time Smile

Thanks !
Reply
#8
(01-28-2025, 06:28 AM)ovidiu.stroe@gmail.com Wrote: How did you managed to find the frequencies for the different settings ? Is there something i can do ? I have time Smile

Thanks !

I have Xhorse Key tool Max, which is able to detect most popular remote frequencies, so after changing Homelink value I just check what frequency it is transmitting. Better would be to use some kind of frequency analyzer or SDR - in this case it is possible to detect any transmitting frequency, but I do not have any of them.
Reply
#9
If your gate opener is not compatible with HomeLink, this external receiver module can be connected as a alternative

https://www.aliexpress.com/item/10050047...nav-review
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)