5 hours ago
I recently had the vehicle towed into the service center unexpectedly so I did not have a chance to restore OEM settings before the vehicle went to Volvo. When I received the car back, the settings were restored to OEM, but when I tried to change them again OrBit fails to flash the ECU:
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: ECU flash FAILED!
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: Error Reason: CEM is not ready for programming
2026-03-16 19:12:13,188 [Main] [INFO] VIN is licensed to enable service features
Could they have locked me out by changing the pins?
Here it the entire log from OrBit:
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: ECU flash FAILED!
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: Error Reason: CEM is not ready for programming
2026-03-16 19:12:13,188 [Main] [INFO] VIN is licensed to enable service features
Could they have locked me out by changing the pins?
Here it the entire log from OrBit:
Code:
2026-03-16 19:08:42,848 [Main.OrBitCore] [INFO] Reconnected successfully, read the car info
2026-03-16 19:08:42,848 [Main] [INFO] Console Message: Connection successful
2026-03-16 19:08:52,665 [Main.OrBitCore] [INFO] Reading info from the car...
2026-03-16 19:08:52,970 [Main.OrBitCore] [INFO] Connected to the CEM
2026-03-16 19:08:53,955 [Main] [INFO] Console Message: Waiting for CEM to be ready...
2026-03-16 19:08:54,335 [Main.OrBitCore] [INFO] OK check for ECU: CEM
2026-03-16 19:08:55,903 [Main.OrBitCore] [INFO] Client connected, read the car info
2026-03-16 19:08:55,903 [Main] [INFO] Console Message: CEM is connected, proceeding
2026-03-16 19:08:55,903 [Main.OrBitCore] [INFO] Reading info from the car...
2026-03-16 19:08:55,903 [Main.OrBitCore] [INFO] Car Model is: PS2
2026-03-16 19:08:55,903 [Main] [INFO] Console Message: Reading Car Info
2026-03-16 19:08:55,903 [Main.OrBitCore] [INFO] Car does not have MVBM
2026-03-16 19:08:55,918 [Main.OrBitCore] [INFO] Car does not have PSMD
2026-03-16 19:08:55,918 [Main.OrBitCore] [INFO] Car has WAM
2026-03-16 19:08:55,918 [Main.OrBitCore] [INFO] Car does not have SUM
2026-03-16 19:08:55,918 [Main.OrBitCore] [INFO] Car has FLC2
2026-03-16 19:08:56,260 [Main.OrBitCore] [INFO] Car Config data read successfully
2026-03-16 19:08:56,288 [Main.OrBitCore] [INFO] Saved latest config read to the profile
2026-03-16 19:08:56,299 [Main.OrBitCore] [INFO] Current mode read from CEM: Inactive
2026-03-16 19:08:56,322 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Normal
2026-03-16 19:08:56,596 [Main.OrBitCore] [INFO] Car build data read successfully
2026-03-16 19:08:56,760 [Main.OrBitCore] [INFO] Car package info read successfully
2026-03-16 19:08:56,760 [Main.OrBitCore] [INFO] Saved latest build info to the profile
2026-03-16 19:08:56,784 [Main.OrBitCore] [INFO] TPMS IDs read successfully
2026-03-16 19:08:56,818 [Main.OrBitCore] [INFO] Update config state in profile: OK
2026-03-16 19:08:56,818 [Main.OrBitCore] [INFO] CEM Config state reports OK
2026-03-16 19:08:56,845 [Main.OrBitCore] [INFO] Last Service Days 430
2026-03-16 19:08:56,845 [Main.OrBitCore] [INFO] DIM Last service state read successfully
2026-03-16 19:08:56,845 [Main.OrBitCore] [INFO] Getting config logic part number
2026-03-16 19:08:56,874 [Main.OrBitCore] [INFO] Read parking brake service status
2026-03-16 19:08:56,909 [Main.OrBitCore] [INFO] Get production mode status for BCM2
2026-03-16 19:08:56,970 [Main.OrBitCore] [INFO] Checking LV battery status
2026-03-16 19:08:57,132 [Main.OrBitCore] [INFO] LV Batt: 12.0V
2026-03-16 19:08:57,132 [Main.OrBitCore] [INFO] LV Batt: 85%
2026-03-16 19:08:57,132 [Main.OrBitCore] [INFO] Get car Type: EV
2026-03-16 19:08:57,132 [Main.OrBitCore] [INFO] Get mileage info from DIM
2026-03-16 19:08:57,153 [Main.OrBitCore] [INFO] Kilometers: 67172
2026-03-16 19:08:57,153 [Main.OrBitCore] [INFO] Miles: 41738
2026-03-16 19:08:57,351 [Main.OrBitCore] [INFO] PH/EV Car Type, get HV battery info
2026-03-16 19:08:57,439 [Main.OrBitCore] [INFO] HV batt SoC: 62.81388%
2026-03-16 19:08:57,580 [Main.OrBitCore] [INFO] HV batt SoH: 89.41%
2026-03-16 19:08:57,580 [Main.OrBitCore] [INFO] Info read from car completed
2026-03-16 19:08:57,580 [Main] [INFO] Console Message: ECU flash FAILED!
2026-03-16 19:08:57,584 [Main] [INFO] Console Message: Error Reason: CEM is not ready for programming
2026-03-16 19:08:57,586 [Main] [INFO] VIN is licensed to enable service features
2026-03-16 19:08:57,591 [Main] [INFO] Flash ready check
2026-03-16 19:08:57,591 [Main] [INFO] Enable Flash ECU
2026-03-16 19:08:57,747 [Main.ConfigHandler] [INFO] Found Logic in OEM package
2026-03-16 19:08:57,853 [Main] [INFO] Disable Air Suspension Calibration for air suspension not equipped
2026-03-16 19:08:57,863 [Main] [INFO] Enabled connected features
2026-03-16 19:08:57,863 [Main] [INFO] Console Message: OrBit Connected
2026-03-16 19:08:57,863 [Main] [INFO] Start report upload thread
2026-03-16 19:08:57,865 [Main.ConfigHandler] [INFO] Send failure diagnostic report
2026-03-16 19:08:59,545 [Main.ConfigHandler] [INFO] Skip log upload while monitor is already running
2026-03-16 19:09:22,305 [Main] [INFO] Console Message: Cancel CEM PIN Set
2026-03-16 19:09:31,921 [Main] [INFO] Set config from wizard running with section filter: FL
2026-03-16 19:09:31,923 [Main] [INFO] Apply preset: FOGLED
2026-03-16 19:09:31,927 [Main] [INFO] Apply preset: LFOGOFF
2026-03-16 19:09:38,227 [Main] [INFO] Set config from wizard running with section filter: HLA
2026-03-16 19:09:38,227 [Main] [INFO] Apply preset: AHB3
2026-03-16 19:09:46,116 [Main] [INFO] Start Flash Config
2026-03-16 19:09:46,116 [Main] [INFO] Flash config, license check OK
2026-03-16 19:09:46,116 [Main.ConfigHandler] [INFO] SW version check is 4.2.19
2026-03-16 19:09:46,116 [Main.ConfigHandler] [INFO] NOT ver 3 AAOS
2026-03-16 19:09:46,271 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Inactive
2026-03-16 19:09:46,271 [Main] [INFO] Console Message: Generated new config data
2026-03-16 19:09:46,271 [Main.OrBitCore] [INFO] Read Batt Status from the car
2026-03-16 19:09:46,393 [Main.OrBitCore] [INFO] Checking LV Batt levels on the CEM
2026-03-16 19:09:46,424 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Inactive
2026-03-16 19:09:46,424 [Main.OrBitCore] [INFO] Test mode check: Inactive
2026-03-16 19:09:46,461 [Main.OrBitCore] [INFO] Checked the LV Batt status
2026-03-16 19:09:46,461 [Main.OrBitCore] [INFO] LV Batt chk: 12.0V
2026-03-16 19:09:46,461 [Main.OrBitCore] [INFO] LV Batt chk: 84%
2026-03-16 19:09:46,461 [Main.OrBitCore] [INFO] Updated LV Batt status in InfoDict
2026-03-16 19:09:46,461 [Main.OrBitCore] [INFO] PH/EV Car Type, get HV battery info
2026-03-16 19:09:46,492 [Main.OrBitCore] [INFO] HV batt SoC: 62.81047%
2026-03-16 19:09:46,609 [Main.OrBitCore] [INFO] HV batt SoH: 89.41%
2026-03-16 19:09:50,257 [Main] [INFO] ****Config change accepted:
2026-03-16 19:09:50,257 [Main] [INFO]
Setting: ACTIVE HIGH BEAM
Current: 03 With AHB1 (On/Off), US/Canada Sensitivity
New: 06 With AHB3 (Adaptive Pixel), EU/RoW Sensitivity
Setting: FOGLIGHT/FUNCTION IN SPOILER
Current: 02 Front foglight not together with high beam
New: 01 Without front foglight restrictions
2026-03-16 19:09:50,257 [Main] [INFO] ******end*******
2026-03-16 19:09:50,268 [Main] [INFO] VIN is licensed to enable service features
2026-03-16 19:09:50,277 [Main] [INFO] Flash ready check
2026-03-16 19:09:50,277 [Main] [INFO] Enable Flash ECU
2026-03-16 19:09:50,279 [Main] [INFO] Console Message: Starting Config flash process
2026-03-16 19:09:50,279 [Main] [INFO] Override SW version in config is unchecked
2026-03-16 19:09:50,283 [Main] [INFO] Flash ready check
2026-03-16 19:09:50,283 [Main] [INFO] Check for flash ready, overriding since currently running other task
2026-03-16 19:09:50,283 [Main.LogicAnalyzer] [INFO] Running private logic analyzer
2026-03-16 19:09:50,283 [Main.LogicAnalyzer] [INFO] Private logic analyzer complete, no changes made
2026-03-16 19:09:50,517 [Main.OrBitCore] [INFO] SBL check OK
2026-03-16 19:09:50,930 [Main.OrBitCore] [INFO] ECU for flashing connected
2026-03-16 19:09:50,930 [Main.OrBitCore] [INFO] Check VGM firewall status
2026-03-16 19:09:51,897 [Main.OrBitCore] [INFO] OK check for ECU: VGM
2026-03-16 19:09:52,004 [Main.OrBitCore] [INFO] Change session for ECU 4098 to ext diag
2026-03-16 19:09:52,495 [Main.OrBitCore] [INFO] Unlock VGM OK
2026-03-16 19:09:52,726 [Main.OrBitCore] [INFO] Disable the VGM firewall
2026-03-16 19:09:52,957 [Main.OrBitCore] [INFO] VGM firewall disable and check OK
2026-03-16 19:09:52,957 [Main.OrBitCore] [INFO] Checking Active mode
2026-03-16 19:09:53,003 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Inactive
2026-03-16 19:09:53,003 [Main.OrBitCore] [INFO] Try to change to Active
2026-03-16 19:09:53,003 [Main.OrBitCore] [INFO] Set mode to Active
2026-03-16 19:09:53,389 [Main.OrBitCore] [INFO] OK check for ECU: CEM
2026-03-16 19:09:53,496 [Main.OrBitCore] [INFO] Change session for ECU 6657 to ext diag
2026-03-16 19:09:54,694 [Main.OrBitCore] [INFO] Unlock CEM OK
2026-03-16 19:09:55,047 [Main.OrBitCore] [INFO] Wait response from the CEM, wait another 3 secs
2026-03-16 19:09:55,296 [Main.OrBitCore] [INFO] Usage Mode control status returned from CEM: 0b
2026-03-16 19:09:55,400 [Main.OrBitCore] [INFO] Set Usage Mode on CEM successful
2026-03-16 19:09:55,400 [Main.OrBitCore] [INFO] Set Active mode successful, wait 3 sec and re-check the usage mode
2026-03-16 19:09:58,315 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Active
2026-03-16 19:09:58,315 [Main] [INFO] Console Message: Switched to Active mode
2026-03-16 19:09:58,315 [Main] [INFO] Console Message: Check Active OK
2026-03-16 19:09:58,315 [Main] [INFO] Console Message: Checking all ECUs are awake
2026-03-16 19:10:02,229 [Main.OrBitCore] [ERROR] Timeout waiting for BMS
2026-03-16 19:10:02,229 [Main.OrBitCore] [INFO] Re-check BMS is ready
2026-03-16 19:10:03,192 [Main.OrBitCore] [INFO] Awake check OK
2026-03-16 19:10:03,192 [Main.OrBitCore] [INFO] Reading build info from CEM
2026-03-16 19:10:03,765 [Main.VBFAssembler] [INFO] Saved CARCFG backup
2026-03-16 19:10:03,765 [Main.OrBitCore] [INFO] iCup car detected
2026-03-16 19:10:03,765 [Main.OrBitCore] [INFO] Check VGM firewall status
2026-03-16 19:10:03,765 [Main] [INFO] Console Message: Start programming mode routine
2026-03-16 19:10:04,564 [Main.OrBitCore] [INFO] Car Type: EV
2026-03-16 19:10:04,564 [Main] [INFO] Console Message: Checking mode and status for programming
2026-03-16 19:10:04,595 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Active
2026-03-16 19:10:04,595 [Main.OrBitCore] [INFO] Skip Engine state check for EV
2026-03-16 19:10:04,632 [Main.OrBitCore] [INFO] Contactor status returned: 62491adf
2026-03-16 19:10:04,632 [Main.OrBitCore] [INFO] Check BECM Contactor status for EV
2026-03-16 19:10:04,632 [Main.OrBitCore] [INFO] BECM Contactor for EV status OK
2026-03-16 19:10:04,632 [Main.OrBitCore] [INFO] Mode and PHEV check and set returned successful
2026-03-16 19:10:04,632 [Main.OrBitCore] [INFO] Check OTA updates running on IHU
2026-03-16 19:10:04,632 [Main] [INFO] Console Message: Checking ECUs are ready...
2026-03-16 19:10:05,041 [Main.OrBitCore] [INFO] OK check for ECU: IHU
2026-03-16 19:10:05,149 [Main.OrBitCore] [INFO] Change session for ECU 4609 to ext diag
2026-03-16 19:10:05,490 [Main.OrBitCore] [INFO] Wait response from the ECU, wait another 4 secs
2026-03-16 19:10:05,825 [Main.OrBitCore] [INFO] Wait response from the ECU, wait another 4 secs
2026-03-16 19:10:05,825 [Main.OrBitCore] [INFO] Start ready for programming routine on all ECUs
2026-03-16 19:10:14,632 [Main.OrBitCore] [INFO] no more responses, 28 recieved
2026-03-16 19:10:20,405 [Main.OrBitCore] [INFO] Timeout waiting for ASDM to respond to the routine request
2026-03-16 19:10:20,405 [Main.OrBitCore] [INFO] Wait for ASDM, 4 secs
2026-03-16 19:10:26,198 [Main.OrBitCore] [INFO] Timeout waiting for ASDM to respond
2026-03-16 19:10:26,198 [Main.OrBitCore] [ERROR] Raw response from 5121: timeout
2026-03-16 19:10:26,198 [Main.OrBitCore] [INFO] We got a negative prog routine start from ASDM: 04
2026-03-16 19:10:31,970 [Main.OrBitCore] [INFO] Timeout waiting for BECM to respond to the routine request
2026-03-16 19:10:31,970 [Main.OrBitCore] [INFO] Wait for BECM, 4 secs
2026-03-16 19:10:37,756 [Main.OrBitCore] [INFO] Timeout waiting for BECM to respond
2026-03-16 19:10:37,756 [Main.OrBitCore] [ERROR] Raw response from 5685: timeout
2026-03-16 19:10:37,756 [Main.OrBitCore] [INFO] We got a negative prog routine start from BECM: 04
2026-03-16 19:10:43,537 [Main.OrBitCore] [INFO] Timeout waiting for BMS to respond to the routine request
2026-03-16 19:10:43,537 [Main.OrBitCore] [INFO] Wait for BMS, 4 secs
2026-03-16 19:10:49,317 [Main.OrBitCore] [INFO] Timeout waiting for BMS to respond
2026-03-16 19:10:49,317 [Main.OrBitCore] [ERROR] Raw response from 7009: timeout
2026-03-16 19:10:49,317 [Main.OrBitCore] [INFO] We got a negative prog routine start from BMS: 04
2026-03-16 19:10:55,102 [Main.OrBitCore] [INFO] Timeout waiting for CCM to respond to the routine request
2026-03-16 19:10:55,102 [Main.OrBitCore] [INFO] Wait for CCM, 4 secs
2026-03-16 19:11:00,871 [Main.OrBitCore] [INFO] Timeout waiting for CCM to respond
2026-03-16 19:11:00,872 [Main.OrBitCore] [ERROR] Raw response from 6673: timeout
2026-03-16 19:11:00,872 [Main.OrBitCore] [INFO] We got a negative prog routine start from CCM: 04
2026-03-16 19:11:06,658 [Main.OrBitCore] [INFO] Timeout waiting for CEM to respond to the routine request
2026-03-16 19:11:06,658 [Main.OrBitCore] [INFO] Wait for CEM, 4 secs
2026-03-16 19:11:12,445 [Main.OrBitCore] [INFO] Timeout waiting for CEM to respond
2026-03-16 19:11:12,445 [Main.OrBitCore] [ERROR] Raw response from 6657: timeout
2026-03-16 19:11:12,445 [Main.OrBitCore] [ERROR] Negative prog ready response from CEM: 04
2026-03-16 19:11:12,445 [Main] [INFO] Console Message: CEM is not ready for programming
2026-03-16 19:11:12,660 [Main.OrBitCore] [INFO] Fail recovery, wait for ECU timeout and reconnect
2026-03-16 19:11:12,660 [Main] [INFO] Console Message: Recovering from failure, wait for programming mode timeout and reconnect...
2026-03-16 19:11:32,733 [Main.OrBitCore] [INFO] Found car with entity request try 1
2026-03-16 19:11:32,733 [Main.OrBitCore] [INFO] VGM reports busy status
2026-03-16 19:11:32,733 [Main] [INFO] Console Message: Reconnecting...
2026-03-16 19:11:34,125 [Main.OrBitCore] [INFO] VIN response from car in 0.016 seconds
2026-03-16 19:11:34,125 [Main] [INFO] Console Message: Reconnected to: LPSED3KA6MLxxxxxx
2026-03-16 19:11:35,149 [Main] [INFO] Console Message: Connection successful
2026-03-16 19:11:35,261 [Main] [INFO] Console Message: Waiting for ECUs to be ready
2026-03-16 19:11:55,423 [Main.OrBitCore] [INFO] Found car with entity request try 1
2026-03-16 19:11:55,423 [Main] [INFO] Console Message: Reconnecting...
2026-03-16 19:11:56,821 [Main.OrBitCore] [INFO] VIN response from car in 0.0527 seconds
2026-03-16 19:11:56,821 [Main] [INFO] Console Message: Reconnected to: LPSED3KA6MLxxxxxx
2026-03-16 19:11:57,838 [Main.OrBitCore] [INFO] Reconnected successfully, read the car info
2026-03-16 19:11:57,838 [Main] [INFO] Console Message: Connection successful
2026-03-16 19:12:08,069 [Main.OrBitCore] [INFO] Reading info from the car...
2026-03-16 19:12:08,389 [Main.OrBitCore] [INFO] Connected to the CEM
2026-03-16 19:12:09,415 [Main] [INFO] Console Message: Waiting for CEM to be ready...
2026-03-16 19:12:09,799 [Main.OrBitCore] [INFO] OK check for ECU: CEM
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Client connected, read the car info
2026-03-16 19:12:11,430 [Main] [INFO] Console Message: CEM is connected, proceeding
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Reading info from the car...
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car Model is: PS2
2026-03-16 19:12:11,430 [Main] [INFO] Console Message: Reading Car Info
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car does not have MVBM
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car does not have PSMD
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car has WAM
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car does not have SUM
2026-03-16 19:12:11,430 [Main.OrBitCore] [INFO] Car has FLC2
2026-03-16 19:12:11,809 [Main.OrBitCore] [INFO] Car Config data read successfully
2026-03-16 19:12:11,811 [Main.OrBitCore] [INFO] Saved latest config read to the profile
2026-03-16 19:12:11,829 [Main.OrBitCore] [INFO] Current mode read from CEM: Inactive
2026-03-16 19:12:11,848 [Main.OrBitCore] [INFO] Current operation mode read from CEM: Normal
2026-03-16 19:12:12,135 [Main.OrBitCore] [INFO] Car build data read successfully
2026-03-16 19:12:12,317 [Main.OrBitCore] [INFO] Car package info read successfully
2026-03-16 19:12:12,317 [Main.OrBitCore] [INFO] Saved latest build info to the profile
2026-03-16 19:12:12,340 [Main.OrBitCore] [INFO] TPMS IDs read successfully
2026-03-16 19:12:12,372 [Main.OrBitCore] [INFO] Update config state in profile: OK
2026-03-16 19:12:12,372 [Main.OrBitCore] [INFO] CEM Config state reports OK
2026-03-16 19:12:12,407 [Main.OrBitCore] [INFO] Last Service Days 430
2026-03-16 19:12:12,407 [Main.OrBitCore] [INFO] DIM Last service state read successfully
2026-03-16 19:12:12,407 [Main.OrBitCore] [INFO] Getting config logic part number
2026-03-16 19:12:12,436 [Main.OrBitCore] [INFO] Read parking brake service status
2026-03-16 19:12:12,484 [Main.OrBitCore] [INFO] Get production mode status for BCM2
2026-03-16 19:12:12,533 [Main.OrBitCore] [INFO] Checking LV battery status
2026-03-16 19:12:12,709 [Main.OrBitCore] [INFO] LV Batt: 12.0V
2026-03-16 19:12:12,709 [Main.OrBitCore] [INFO] LV Batt: 83%
2026-03-16 19:12:12,709 [Main.OrBitCore] [INFO] Get car Type: EV
2026-03-16 19:12:12,709 [Main.OrBitCore] [INFO] Get mileage info from DIM
2026-03-16 19:12:12,741 [Main.OrBitCore] [INFO] Kilometers: 67172
2026-03-16 19:12:12,741 [Main.OrBitCore] [INFO] Miles: 41738
2026-03-16 19:12:12,948 [Main.OrBitCore] [INFO] PH/EV Car Type, get HV battery info
2026-03-16 19:12:13,028 [Main.OrBitCore] [INFO] HV batt SoC: 62.79915%
2026-03-16 19:12:13,182 [Main.OrBitCore] [INFO] HV batt SoH: 89.41%
2026-03-16 19:12:13,182 [Main.OrBitCore] [INFO] Info read from car completed
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: ECU flash FAILED!
2026-03-16 19:12:13,188 [Main] [INFO] Console Message: Error Reason: CEM is not ready for programming
2026-03-16 19:12:13,188 [Main] [INFO] VIN is licensed to enable service features
2026-03-16 19:12:13,188 [Main] [INFO] Flash ready check
2026-03-16 19:12:13,188 [Main] [INFO] Enable Flash ECU
2026-03-16 19:12:13,378 [Main.ConfigHandler] [INFO] Found Logic in OEM package
2026-03-16 19:12:13,474 [Main] [INFO] Disable Air Suspension Calibration for air suspension not equipped
2026-03-16 19:12:13,474 [Main] [INFO] Enabled connected features
2026-03-16 19:12:13,474 [Main] [INFO] Console Message: OrBit Connected
2026-03-16 19:12:13,474 [Main] [INFO] Start report upload thread
2026-03-16 19:12:13,474 [Main.ConfigHandler] [INFO] Send failure diagnostic report
2026-03-16 19:12:15,430 [Main.ConfigHandler] [INFO] Skip log upload while monitor is already running