Fog light retrofit( HELP )

[Szigi]

Hello everyone
I want to retrofit foglight to my v60 from 2020
I saw a video with an s60 where a man sucsessfuly installed the fog light, but i can't find it anymore, so i would need some help
I found the codes for the fog lights and for the grill.
I want to make it the oem way, i know that i need some wire from the cem, and probably two relays for the fog light, because of the cornering light.
Any information would be great.
Can i wire the cable by myself? What type of connectors do i need, or should i buy the whole cable harness? Also i am thinking to retrofit with time 360 camera.
I am not affraid of solidering and i would prefer that way because it is cheaper.
Sorry for my pronunciation, and thanks in advice for the help!!

[IMAY2023]

You do not need any relays, fuses at all. Fog lights including cornering lights are controlled by the CEM. 
Your current pumber harness should have the fog light connectors and the wiring up to the harness connector behind the driver side plastic cover. 
You need three wires from that connector. Ground, left and right positive. 
For Ground, you can take it from any ground connector on the body. 
Two positive wires goes to the CEM.  
all the info you need is in this thread. https://forums.spaycetech.com/showthread...fog+lights