+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: conversion and srs module clear (/showthread.php?tid=742)
conversion and srs module clear - hottt - 01-09-2025
Hello, is it possible to do:
- conversion from US to EU
- delete failure data from srs controller?
If so, what package do I need to buy to do this on my car?
RE: conversion and srs module clear - Power6 - 01-09-2025
(01-09-2025, 12:04 PM)hottt Wrote: Hello, is it possible to do:
- conversion from US to EU
- delete failure data from srs controller?
If so, what package do I need to buy to do this on my car?
Yes, there is a caveat to the SRS though:
US to EU configs change, units, maps etc. - YES
Clear SRS module - Yes OrBit can clear the event history (crash status) if that's what you ask about, BUT some SRS modules go into "crash locked" status after a crash event. If that's the case, only a bench hardware programming tool that unlocks the SRS from crash locked state can resolve that. There are vendors in many local places that offer a service to send in the SRS module for unlocking if you don't want to invest in a tool to do it. OrBit can clear the event history and adapt the SRS in the car if it is not locked.
The buying guide may help on what you need to buy, it depends on what PINs the specific car needs (CEM or CEM/VGM), how will you get the PINs, on your own or will you purchase the PIN retrieval from us. https://forums.spaycetech.com/showthread.php?tid=545