+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Misc (https://forums.spaycetech.com/forumdisplay.php?fid=16)
+--- Thread: Webasto runtime setting (/showthread.php?tid=360)
Webasto runtime setting - mrthemas - 02-12-2024
Greetings from cold weather!
I wonder if there is any setting for the runtime of the Webasto heater. With the help of Orbit and advice on this forum I have manged to get the Webasto heating the engine also. However, the default runtime for the Webasto is only ½h and that is not quite enough if the outside temperature is below -20deg C. I remember that Volvo pre 2019 could run their Webasto for almost an hour.
Can the preheating Webasto runtime be changed with Orbit somehow?
RE: Webasto runtime setting - Power6 - 02-12-2024
Possibly...send me a message at support? I want to look specifically into the climate module in your car, see if there is a possibility to modify it. If we can figure out there is a way, then possibly something to add to OrBit as a specific procedure. We can test things without any OrBit application changes needed.
RE: Webasto runtime setting - Staffanlind - 02-12-2024
(02-12-2024, 08:29 PM), iPower6 Wrote: Possibly...send me a message at support? I want to look specifically into the climate module in your car, see if there is a possibility to modify it. If we can figure out there is a way, then possibly something to add to OrBit as a specific procedure. We can test things without any OrBit application changes needed.
That looks good. I have same problem in my car. Have you had time to look for my other question?
RE: Webasto runtime setting - BeachBoy - 02-13-2024
It could also be possibly modified on the Webasto side and not Volvo, using Webasto Thermo Test software
RE: Webasto runtime setting - Orman - 03-05-2024
How did you get the Webasto heater to also heat the engine?
RE: Webasto runtime setting - mrthemas - 03-07-2024
Look at option "345". In this forum thread " Need Advice on Controlling Coolant By-Pass Valve in Cold Conditions "...
RE: Webasto runtime setting - Orman - 03-08-2024
(03-07-2024, 05:04 PM)mrthemas Wrote: Look at option "345". In this forum thread " Need Advice on Controlling Coolant By-Pass Valve in Cold Conditions "...
Ah thanks. Do you get a fault code after disabling the bypass valve?
RE: Webasto runtime setting - mrthemas - 03-08-2024
No fault codes after disabling and the coolant runs through the cabin heater to the engine!
RE: Webasto runtime setting - Machist - 03-13-2024
This thread also intresting me. It would be great if you can modify Webasto runtime via Orbit
RE: Webasto runtime setting - Orman - 03-15-2024
Is it possible to keep the Webasto heater running after starting the engine?