OrBit Forums
Connectivity issues - Printable Version

+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: Car Connectivity (https://forums.spaycetech.com/forumdisplay.php?fid=14)
+--- Thread: Connectivity issues (/showthread.php?tid=1420)

Pages: 1 2


Connectivity issues - Hubble - 08-16-2026

New to Orbit. Try to connect to 2019 XC60 receiving following messages
Connecting…
Waiting for the gateway to respond…
Unable to connect. VOE connection is present but the car will not accept the connection

What haven’t I done right. 
Thanks 
Hubble


RE: Connectivity issues - jos - 08-16-2026

Ignition on, engine off?


RE: Connectivity issues - Hubble - 08-16-2026

Yes two turns of the start knob till ignition active but motor not started.

(08-16-2026, 09:51 PM)jos Wrote: Ignition on, engine off?

Yes two turns of the start knob till ignition active but motor not started.


RE: Connectivity issues - Hubble - 08-17-2026

(08-16-2026, 10:46 PM)Hubble Wrote: Yes two turns of the start knob till ignition active but motor not started.

(08-16-2026, 09:51 PM)jos Wrote: Ignition on, engine off?

Yes two turns of the start knob till ignition active but motor not started.

Yes, engine off. Ignition on.


RE: Connectivity issues - Braxia - 08-17-2026

What kind of cable are you using? I had those error when OBD part was not seated properly


RE: Connectivity issues - MrS60II - 08-17-2026

on my 2022 i have to hold the start knob turned couple of seconds to get "real" ignition mode...


RE: Connectivity issues - Terence - 08-17-2026

Orbit should be able to connect also when engine is running but config change requires ignition on and engine off state.


RE: Connectivity issues - Hubble - 08-17-2026

(08-17-2026, 04:40 AM)Braxia Wrote: What kind of cable are you using? I had those error when OBD part was not seated
VOE OBD Ethernet Cable for Volvo Vehicles Based on SPA CMA Platform 2016+ Replace 9513108 9513062, 6.5 Ft RJ45 OBD Cable with USB Adapter Compatible with VIDA PC Software or Third-Party Software 





VOE OBD Ethernet Cable for Volvo Vehicles Based on SPA CMA Platform 2016+ Replace 9513108 9513062, 6.5 Ft RJ45 OBD Cable with USB Adapter Compatible with VIDA PC Software or Third-Party Software 





  1.    



RE: Connectivity issues - jos - 08-17-2026

Are you using that usb network dongle? Try it on a real network will it function normally? Cause of this reason i use a valid lenovo bigbook with a real ethernet adapter. Check this usb thing out if in use.


RE: Connectivity issues - Hubble - 08-18-2026

Checked all connections, rechecked and came back with:
VOE connection is present but the car will not accept the connection.

Have ordered a replacement cable to eliminate the cable and adapter as a problem but still no connection.