OrBit Forums
Retrofit Volvo V60 B&W - Printable Version

+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit Volvo V60 B&W (/showthread.php?tid=24)

Pages: 1 2 3 4 5 6 7 8

RE: Retrofit Volvo V60 B&W - Marcp - 10-04-2025

(02-07-2023, 01:34 PM)TweakeNL Wrote: Hi mate,
Can you give instructions on how you removed the ceiling?
I've already assembled and replaced everything, I just need to install the ceiling speakers.
Thanks!


RE: Retrofit Volvo V60 B&W - thermal-fixity - 10-22-2025

Trying to install the center dash speakers to a HP XC90. Anyone could share a photo or perhaps more details on where the other ends of the plugs are hidden in the AUD area?

EDIT: Found the other ends, they are terminated at the white plug under the passenger's footwell. Taped into them with generic splice terminals.

RE: Retrofit Volvo V60 B&W - thermal-fixity - 10-22-2025

I'm trying to add two Harman Kardon center dash speakers instead of the one I have with my High Performance system. Need some help with sorting out wiring.
  • Where is the HK tweeter (smaller) speaker is to be connected to?
  • The mid (larger) speaker is to be connected to the AUD 10/2 pins. My XC90 already has a plug for it and the wires running to the white plug behind the passenger's footwell. So, I'm going to just take it from there and run to the AUD.
My current HP tweeter is not connected to the AUD. ChatGpt says that the current tweeter runs to the IHU and only used the system sounds and not music. Chat says the tweeter is eventually to be connected to the same AUD 10/2 pins but I cannot find any confirmation online.

Should the tweeter wires just be simply joined with the mid channel?
[Image: ?auto=webp&fit=bounds&format=pjgp&height...width=1920]