+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Key coding (/showthread.php?tid=169)
RE: Key coding - TweakeNL - 05-02-2024
Just a small note: Apparently there is a new rule in the EU that you are only allowed to program new keys when having certificates. (https://www.vehiclesermi.eu/)
So if you are in the EU and you have VIDA as an independent workshop it may be a problem.
RE: Key coding - R1maS - 05-02-2024
(05-02-2024, 08:45 AM)TweakeNL Wrote: Just a small note: Apparently there is a new rule in the EU that you are only allowed to program new keys when having certificates. (https://www.vehiclesermi.eu/)
So if you are in the EU and you have VIDA as an independent workshop it may be a problem.
Till day before yesterday everything was working. EU, independent workshop.
RE: Key coding - Swer - 05-30-2024
Hi. Maybe someone can help me to solve the problem? I have used key from another car, then i try programming him to the car (xc60 2019my), i put key in cup holder, battery new, Orbit say Key not found, and then i read DTC, i receive error CEM: Key system programming failures-system programming failures, what am i doing wrong? Orbit version newest, pin 11 generated/saved. I read the forum, and didn't find an answer. Thank you very much for help.
RE: Key coding - Amphicar770 - 06-05-2024
Question. I ordered a used Volvo key fob, the one with buttons.
Tried adding it to my 2022 Polestar. OrBit retrieved the PIN, but says key not found (in cupholder).
I did notice it states that it can program "passive key fob". Does that mean the one without buttons?
Possible that I got a bad fob, I did put a new battery in it. Not sure how likely that is?
Thanks.
RE: Key coding - Swer - 06-11-2024
Is there a solution to the problem?
RE: Key coding - krienks - 06-18-2024
(05-30-2024, 01:33 PM)Swer Wrote: Hi. Maybe someone can help me to solve the problem? I have used key from another car, then i try programming him to the car (xc60 2019my), i put key in cup holder, battery new, Orbit say Key not found, and then i read DTC, i receive error CEM: Key system programming failures-system programming failures, what am i doing wrong? Orbit version newest, pin 11 generated/saved. I read the forum, and didn't find an answer. Thank you very much for help.I had the same problem, 'key not found' and 'programming failure', also in a XC60 MY2019. I was able to program the keys in the end by changing the position of the key in the cupholder. Try a few different positions, worked for me.
RE: Key coding - paska - 06-19-2024
(06-11-2024, 11:52 AM)Swer Wrote: Is there a solution to the problem?
Hi try to put the Volvo loggo point outside in the cupholder you should see the loggo when its placed there.
Worked for me.
RE: Key coding - Swer - 06-19-2024
thanks guys i will try it
RE: Key coding - paska - 06-20-2024
(06-19-2024, 12:27 PM)Swer Wrote: thanks guys i will try it
Hi here is some pictures how it should be done.
RE: Key coding - whor22 - 06-20-2024
Last week I tried to program a new key. I have two used keys. but the Orbit 11level code could not be calculated, and programming the key is not possible. I tried three times, same result
Pin Extract failed
Error Reason: Error getting data from the CEM
XC40 2018 D4 AWD R-Design
p.s. is there any hope for a solution? I really hoped that this would work in my car. I really need this option. Now I'm upset
