![]() |
Engine Remote Start - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3) +--- Forum: Misc (https://forums.spaycetech.com/forumdisplay.php?fid=16) +--- Thread: Engine Remote Start (/showthread.php?tid=15) |
RE: Engine Remote Start - Lukas - 03-04-2025 i changed all three settings. it doesn't work for me write all the changes you set for remote start. I have a 2019 xc40 RE: Engine Remote Start - Lukas - 03-07-2025 (03-02-2025, 08:30 PM)Joe558 Wrote: 45=key only it already works. everything great. thank you RE: Engine Remote Start - Northern - 03-17-2025 (12-20-2024, 07:53 AM)IonD Wrote: However, there are some trade-offs: So the trunk doesn't open from the key fob. The trunk does open from the foot sensor, the button under the dash, and the foot sensor. Does the exterior button on the trunk work? I use the fob to open the trunk pretty often, would be nice to retain that functionality as it saves me a few seconds getting stroller or junk in/out. RE: Engine Remote Start - Lukas - 03-17-2025 the outer button works as for this one. RE: Engine Remote Start - Northern - 03-18-2025 Is there a maximum duration for the remote start via key? The app has a maximum of 15 minutes, but defaults to 8 and I need to use a slider to drag it to 15 every time I start the car, and even 15 leaves an incredibly short time window between car-somewhat-warm and car-turned-itself-off. Still trying to mentally pro/con this... RE: Engine Remote Start - inkirby - 03-30-2025 Hi, this thread really helps me trying to get remote start working on my 2020 V60. Mine have no VOC or even no SIM module, which makes remote starting from the app impossible anyway. I found that configuring the car with the "Police" mode works! What I've set: 045 - 05 ERS by key, running light 050 - 05 Police 276 - 10 Police Customs Unmarked But, I lost: - Kick activated auto trunk doesn't work - Trunk key doesn't work - Holding unlock/lock key to open/close all windows doesn't work - Panic button doesn't work Maybe I need to change some more configs to get the trunk key to work again? RE: Engine Remote Start - Lukas - 03-30-2025 The key start works on my XC40, I haven't lost any functions, the windows work with the key, the tailgate works without any problems. I have 045-02 RE: Engine Remote Start - sayokama - 04-08-2025 (03-30-2025, 03:28 PM)Lukas Wrote: The key start works on my XC40, I haven't lost any functions, the windows work with the key, the tailgate works without any problems. Just to confirm your configuration: 45 - 02 50 - 05 276 - 10 My xc40 2021 Sensus also works only with changes for 276. But it lost buttons functionality as mentioned before (Windows and Trunk control) RE: Engine Remote Start - Lukas - 04-09-2025 (04-08-2025, 08:21 PM)sayokama Wrote:(03-30-2025, 03:28 PM)Lukas Wrote: The key start works on my XC40, I haven't lost any functions, the windows work with the key, the tailgate works without any problems. yes, I have these settings RE: Engine Remote Start - sayokama - 04-10-2025 (04-08-2025, 08:21 PM)sayokama Wrote:(03-30-2025, 03:28 PM)Lukas Wrote: The key start works on my XC40, I haven't lost any functions, the windows work with the key, the tailgate works without any problems. Small updates here: Currently, ERS works with no issues or limitations. The key fob works flawlessly as well. Configuration: 45 - key + phone app 50 - Police 276 - VIP And one thing that I've noticed. If you'll write those configs to the car in one go — a key fob loses windows and trunk functionality. But when you update 275 config first, and then update 45 — all should work well, including key fob functions. Seems like 276 configs could have some influence on a windows and trunk functionality (maybe for the police type it's expected to be disabled). And by updating 45 — you update those functions back. I'm not sure if that will resolve all the issues for the rest of cars, but I've tried it a few times and every time it worked for me in this way. Furthermore, ERS could not work right after the configs update. But if you'll press the lock button twice and hold — you should see either the actual engine start, or the "engine check" icon flashing one or two times. For me, that was an indication that EMS functionality is working. After a few minutes, you should be able to start a car remotely. |