+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit Volvo V60 B&W (/showthread.php?tid=24)
RE: Retrofit Volvo V60 B&W - IMAY2023 - 03-05-2025
cut out a thin plywood and glue it so that the plastic clips hold it or just use double sided tape to stick the cover over the whole. With little bit heat you can remove later on
RE: Retrofit Volvo V60 B&W - ayastrebov - 05-13-2025
(03-05-2025, 08:02 AM)IMAY2023 Wrote: cut out a thin plywood
Come on, that's an awful idea.
I have designed and 3Dprinted the rings. Will install them in a few weeks
RE: Retrofit Volvo V60 B&W - SlapNutz - 05-23-2025
Hi can someone look into this as I can't be bothered to retype everything.
https://forums.spaycetech.com/showthread.php?tid=885
Any idea response would be great.
Regards
Slapz