+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit How-To Guides (https://forums.spaycetech.com/forumdisplay.php?fid=15)
+--- Thread: How to buy used key fobs - SPA/CMA key fob and config guide (/showthread.php?tid=280)
RE: How to buy used key fobs - SPA/CMA key fob and config guide - nugget - 12-24-2024
Couple updates:
1. I tried programming one of my wife's S60 key in my S90, and it stopped working on the S60. Later when I programmed it in the S60, it showed key already exists, and I had to remove all keys to reprogram it.
Same key for two vehicles doesn't work (not surprising lol)
2. My S90 didn't originally come with a care key, and '214 Restricted Key Function' says 01 Without restricted key. Despite that, programming a care key from eBay auto attached it to a profile that was restricted. Likely because my car didn't originally come with a care key, there was no setting for the speed limit either. It's a 2018 S90 and was likely one of the first SPA models, so acts differently
RE: How to buy used key fobs - SPA/CMA key fob and config guide - bretalanwest - 01-21-2025
For anyone that might be interested in having a backup for the fob, I was able to get keys cut at my local Ace Hardware. I called ahead to confirm after going to one location and being turned away. They were reluctant but ended up doing them for free after I mentioned that we called ahead. I bought a 10-pack on Ali Express. It took about 10 mins to cut because the metal is so denser than your typical house key. Locksmith quoted me 50$ and another quoted me 150$. A 10-pack of blanks costs 11$. If anyone needs/wants a key blank, DM me. I will hold on to them for a week or two and then recycle.
RE: How to buy used key fobs - SPA/CMA key fob and config guide - ChainedAlice - 01-21-2025
Can you program a normal key to be a Care Key?
RE: How to buy used key fobs - SPA/CMA key fob and config guide - bretalanwest - 01-22-2025
(01-21-2025, 08:29 PM)ChainedAlice Wrote: Can you program a normal key to be a Care Key?Having just gone through the steps - I did not see any options.