+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit How-To Guides (https://forums.spaycetech.com/forumdisplay.php?fid=15)
+--- Thread: How to buy used key fobs - SPA/CMA key fob and config guide (/showthread.php?tid=280)
How to buy used key fobs - SPA/CMA key fob and config guide - Partridge - 01-27-2024
Maybe I was lucky but both of the sport keys I bought from AliExpress worked fine.
Sent from my iPhone using Tapatalk
RE: How to buy used key fobs - SPA/CMA key fob and config guide - Dougray - 01-27-2024
(01-26-2024, 10:12 AM)Altawashm Wrote: didnt work for me "error" normal and sport key, im scared to do "erase all" maybe wont work with old key also hahhaaha
but thanks for the hard work and more futures.
Was this Ali express or genuine key fobs? If genuine, you should contact support.. It might be singing simple. I had an error first try, turned out I was doing something stupid. If orbit decoded the security pin, I think it should be able to code the keys.
RE: How to buy used key fobs - SPA/CMA key fob and config guide - danthe88 - 01-27-2024
And you will get one with dead battery again…
RE: How to buy used key fobs - SPA/CMA key fob and config guide - Altawashm - 01-29-2024
(01-27-2024, 03:58 AM)Dougray Wrote:(01-26-2024, 10:12 AM)Altawashm Wrote: didnt work for me "error" normal and sport key.....
Was this Ali express or genuine key fobs? If genuine, you should contact support.. It might be singing simple. I had an error first try, turned out I was doing something stupid. If orbit decoded the security pin, I think it should be able to code the keys.
Actually i got it from uujxx.com
I went to a key Smith and he confirmed the signal is going out.
I will try again as u said maybe it's a stupid mistake from my side
RE: How to buy used key fobs - SPA/CMA key fob and config guide - Power6 - 01-29-2024
(01-26-2024, 10:12 AM)Altawashm Wrote: didnt work for me "error" normal and sport key, im scared to do "erase all" maybe wont work with old key also hahhaaha
but thanks for the hard work and more futures.
One "trick" you can use here...try to program the existing key. If everything is working correctly, you should get a return "Key already programmed" which will let you know the key would program without issue, if it was not already paired to the car.
RE: How to buy used key fobs - SPA/CMA key fob and config guide - Altawashm - 01-31-2024
(01-29-2024, 08:51 PM)Power6 Wrote:(01-26-2024, 10:12 AM)Altawashm Wrote: didnt work for me "error"....
One "trick" you can use here...try to program the existing key. If everything is working correctly, you should get a return "Key already programmed" which will let you know the key would program without issue, if it was not already paired to the car.
the old KEY also shows "ERROR" i think maybe the problem is with my car.
is there any PIN or CEM things i need to do ?
RE: How to buy used key fobs - SPA/CMA key fob and config guide - a.e.malin91@gmail.com - 02-05-2024
Tell me, is it possible to change the type of switch in block 092 in the car and register 2 switches of a different type?
RE: How to buy used key fobs - SPA/CMA key fob and config guide - Apansson - 08-28-2024
Is it possible to remove a lost key?
RE: How to buy used key fobs - SPA/CMA key fob and config guide - volvo.man - 08-28-2024
(08-28-2024, 07:05 PM)Apansson Wrote: Is it possible to remove a lost key?
you need to erase ALL keys and then re-program the remaining keys
RE: How to buy used key fobs - SPA/CMA key fob and config guide - jdhx - 09-11-2024
Just to add my penniworth.
OrBit successfully has programmed 2 orange MS keys to my MY19 XC60 but throws a dtc CEM-B14DE05 Programming failure which OrBit would not clear. The keys work well.
I took the car to a Volvo independant who used VIDA on it and concluded that the CEM needs new firmware, part nr 31419581 which is only available with a new fob, estimated total cost of £200. VIDA was able to clear the dtc!
I have an Aliexpress sport fob coming and I will first check if it is giving out a signal strength comparable to the orange ones before I try and program it.
One thing about the orange keys, although they work well I can't pair a profile to either of them. That could be because my CEM firmware is not up to date but could it be that restricted keys can't be paired? Anyone paired restricted keys successfully?
Someone mentioned 3d printing of sport fob cases, anyone got a link to the 3d design?