+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Adding motion / tilt sensors to CMA vehicles (/showthread.php?tid=217)
RE: Adding motion / tilt sensors to CMA vehicles - Aliaksandr - 12-01-2024
How can I register VIN in the BBS unit?
RE: Adding motion / tilt sensors to CMA vehicles - Aliaksandr - 12-05-2024
I figured out that I need to activate option 66 - set 02. There is no need to flash the VIN.
RE: Adding motion / tilt sensors to CMA vehicles - ovidiu.stroe@gmail.com - 02-03-2025
I would like to retrofit my xc90 2017 with IMS and BBS ( Eu version ) and i would like to know how do you guys know which parts to buy, what parts number. Is there a website/app ?
Thank you !
RE: Adding motion / tilt sensors to CMA vehicles - IMAY2023 - 02-04-2025
As far as I know it replaces the existing Siren
RE: Adding motion / tilt sensors to CMA vehicles - ovidiu.stroe@gmail.com - 02-05-2025
Unfortunately after i purchased the IMS i and removed the top light assembly the connector for the IMS is not present ... could it be hidden in the liner ? Car is XC90 2017 ( Eu version ).
Adding motion / tilt sensors to CMA vehicles - Pau1ey - 02-05-2025
On our 2019 XC90 and 2020 XC60 the green connectors were taped to the headliners several inches in on the left of the opening.
RE: Adding motion / tilt sensors to CMA vehicles - ovidiu.stroe@gmail.com - 02-05-2025
Thanks .. i shall go to try fish it out
Adding motion / tilt sensors to CMA vehicles - Pau1ey - 02-05-2025
Good luck! I stuck my phone in the opening with the light on and recorded a video to find it. There should be a main bundle of wires which it is taped together with, and only a tiny bit of the green end was visible. It was much more difficult on the XC60 for some reason.
RE: Adding motion / tilt sensors to CMA vehicles - ovidiu.stroe@gmail.com - 02-05-2025
I found it under a few layer of tape .. the space is crowded but found it aprox 10-12 cm ( for the metric folks ) to the left of the opening ..
Thank you a lot for the very useful info.
Related to the BBS ( the siren ): where should that be installed ? Does anyone has a schema for the xc90 2017 ?
Thank you !
RE: Adding motion / tilt sensors to CMA vehicles - IMAY2023 - 02-05-2025
(02-05-2025, 06:58 PM)ovidiu.stroe@gmail.com Wrote: I found it under a few layer of tape .. the space is crowded but found it aprox 10-12 cm ( for the metric folks ) to the left of the opening ..
Thank you a lot for the very useful info.
Related to the BBS ( the siren ): where should that be installed ? Does anyone has a schema for the xc90 2017 ?
Thank you !
Sometimes Volvo does provide useful info to consumers :-)
https://accessories.volvocars.com/en-us/InstallationInstruction/Document/VCC-451816-3/XC90(16-)/2017/T5/Automatic/default/all/XC90(16-)%202017