+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Audio / Visual (https://forums.spaycetech.com/forumdisplay.php?fid=7)
+--- Thread: Troubleshooting failed speaker - B/W (/showthread.php?tid=682)
Pages:
1
2
RE: Troubleshooting failed speaker - B/W - Percy - 07-27-2025
Hi!
The XC60. has roof speakers and i have retrofitted all the wiring including the roof speakers.
I will try coding 14 speakers next time..
RE: Troubleshooting failed speaker - B/W - IMAY2023 - 07-28-2025
Quote:I will try coding 14 speakers next time..This will not work. It's a legacy config.
The roof speakers go to the middle connector. If you installed B&W AUD, you should choose Premium Audio and that's it.
RE: Troubleshooting failed speaker - B/W - Percy - 08-05-2025
(07-28-2025, 09:18 AM)IMAY2023 Wrote:Quote:I will try coding 14 speakers next time..This will not work. It's a legacy config.
The roof speakers go to the middle connector. If you installed B&W AUD, you should choose Premium Audio and that's it.
Ok. Thanks for answer. I will make a second check on the connectors instead.
Best regards
RE: Troubleshooting failed speaker - B/W - Percy - 08-09-2025
(08-05-2025, 11:44 AM)Percy Wrote:(07-28-2025, 09:18 AM)IMAY2023 Wrote:Quote:I will try coding 14 speakers next time..This will not work. It's a legacy config.
The roof speakers go to the middle connector. If you installed B&W AUD, you should choose Premium Audio and that's it.
Ok. Thanks for answer. I will make a second check on the connectors instead.
Best regards
Hi again, You were absolutely right, i had turned the connector upside down while putting in the pins, so when i moved to the pins to the right location everything works perfect.
Thanks
