+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: 2018 V90CC - Use OrBit to Add/Program a Hitch CTRL Module? (/showthread.php?tid=319)
Pages:
1
2
RE: 2018 V90CC - Use OrBit to Add/Program a Hitch CTRL Module? - Dougray - 01-27-2024
This is really good to know. So basically any used trm from any used spa platform should work on my xc60. Have I got that right?
RE: 2018 V90CC - Use OrBit to Add/Program a Hitch CTRL Module? - Power6 - 01-29-2024
Yes, that seems to be the case. Something new could be found of course, but everything I see is all application use the same software.
If you do this and hit any snags, just send a message to support, I can probably help you out if you hit any issues. Most likely you install and enable in config and all works.