+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Misc (https://forums.spaycetech.com/forumdisplay.php?fid=16)
+--- Thread: [S90 - 2017] Getting Drive Mode on-screen select to work without the selector switch (/showthread.php?tid=951)
[S90 - 2017] Getting Drive Mode on-screen select to work without the selector switch - pjmq - 07-11-2025
Hi folks,
I'm trying to get the drive mode selector UI to show up on my S90 *without* having the physical hardware selector present.
I've set #057 to 03 and #452 to 01 but despite individual drive modes showing up under "My Car" in Sensus, I don't seem to have the drive mode option.
In addition, i've lost the 'Eco Mode' toggle on my main page as well as the hill ascent assist selector.
Any help here would be sincerely appreciated as I'm at a bit of a loss!
Has anyone managed to figure out what config combo will make this work on the xc90, v90 or s90?
RE: [S90 - 2017] Getting Drive Mode on-screen select to work without the selector switch - lee8 - 07-23-2025
Im in a similar position - s90 without the button. I tried many combinations without success (i mainly want the polestar gear shift mapping, as i already have polestar tume from dealer).
Ive purchased a button panel to retrofit - but uncertain if it will be plug and play or require some wiring mods due to the rear seat climate control buttons. Ill post back if i get around to installing
