+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Lights (https://forums.spaycetech.com/forumdisplay.php?fid=4)
+--- Thread: changes in codes for Polestar 2 software 3.6.2 (/showthread.php?tid=928)
changes in codes for Polestar 2 software 3.6.2 - gregcagle - 06-25-2025
I took the OTA update for Polestar 2 software 3.6.2. Went back in with Orbit to check on entry 109 for Pixel headlights; it has been reset so I fixed that. Also went to check entry 106 for high beam memory, and it has been replaced with something entirely different: "Headlights, Type" with settings A-11 (hex). The P2 is set to 11, "LED, Type A, Pixel Headlamp with HCM" Which seems OK, but now I'm wondering where to set the high beam memory function so I don't have to turn the auto high beam ring every time I get in the car. I scrolled up and down the code list and couldn't find anything obvious. Any ideas?
RE: changes in codes for Polestar 2 software 3.6.2 - Voytech - 06-27-2025
Not sure where you're located but for me the US adaptive headlight setting did not work after the OTA update. I tried the EU/ROW spec and that did work although it seems it's behaves slightly different.. slower perhaps?