+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Engine / Transmission (https://forums.spaycetech.com/forumdisplay.php?fid=8)
+--- Thread: Change gear shift-er pattern (/showthread.php?tid=875)
Change gear shift-er pattern - honest_saison - 05-13-2025
In the newer Volvo's, you can go from R>D in one push of the shifter (perhaps the same time Android Automotive was added?). In the older SPA cars (including my '20 V60 CC), you have to push the shifter as if it's sequential from R>N>D.
Does anyone know if this can be changed in Orbit?
I see ID 039 and I'm already on 03 (I haven't had chance to try the other 2 options but seems like the newer option would be the later option?)
01 Without Shift By Wire
02 Shift By Wire
03 SHIFT BY WIRE (pattern type 2)
RE: Change gear shift-er pattern - x119 - 05-13-2025
01 won't work, that's for the lever based gear shifter which is cabled.
02 might work, you'll just need to try it! Nothing to lose, you can always go back to 03 if it throws an error.
RE: Change gear shift-er pattern - Ura1961 - 05-18-2025
Try it, we will be grateful.
RE: Change gear shift-er pattern - Altawashm - 05-30-2025
Keep N between R & D is safer for the engine and gearbox.
Or if it program not shift if the car any any motion, then ur fine.