+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Diagnostics and Maintenance (https://forums.spaycetech.com/forumdisplay.php?fid=21)
+--- Forum: DID - Data Reading by ID (https://forums.spaycetech.com/forumdisplay.php?fid=23)
+--- Thread: Engine code (/showthread.php?tid=489)
Engine code - przemek219 - 06-12-2024
Czy można gdzieś w programie odczytać kod silnika?
Is it possible to read the engine code somewhere in the program?
RE: Engine code - IMAY2023 - 06-12-2024
(06-12-2024, 09:26 AM)przemek219 Wrote: Czy można gdzieś w programie odczytać kod silnika?
Is it possible to read the engine code somewhere in the program?
If you are talking about ECM "Engine control module" trouble codes "DTCs", yes you can. You can also clear them. However, some trouble codes will come back after clearing them such as "P0171 - System Too Lean (Bank 1)" because it requires to clear the adaptations. A work around for this, pull out the battery negative port at least for an hour.
RE: Engine code - danthe88 - 06-12-2024
Mislim da on zeli da procita broj motora.
RE: Engine code - przemek219 - 06-13-2024
I mean exactly the engine code and not the b420t2 errors