Software activation niggle - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1) +--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24) +--- Thread: Software activation niggle (/showthread.php?tid=238) |
Software activation niggle - Hot Toddy - 10-07-2023 I just purchased a year's subscription and CEM pin for my XC60. While waiting for the CEM pin to be generated from my VIN, I've downloaded and installed the software ready to play with it. I obtained the 'one-time' code (based on my purchase email address) which activated the software for use. But apparently, this is only for that session of use. I was surprised to be asked to go through the entire process again the next time I invoked the software. Is this something I'll have to do every time I run the software? More like 'every-time' code rather than 'one-time' code. Which may become a little irritating. Especially if I don't have an internet connection when working on the car. Although I appreciate this method provides far better protection from the software being pirated. RE: Software activation niggle - x119 - 10-08-2023 It’s cached - from the change log of the relevant release: Quote:New features: Software activation niggle - BeachBoy - 10-09-2023 I used orbit in the airplane on a 10h flight. Once logged in you can keep the session alive as long as you want. Sent from my Pixel 6 Pro using Tapatalk RE: Software activation niggle - Hot Toddy - 10-09-2023 Works for me. Thanks for clarifying. RE: Software activation niggle - Power6 - 10-11-2023 OrBit will cache the login for a day. There is a limit to logins, 25 if I remember writing the code ;-) But generally within a day you should only need to authenticate once. |