+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: Volvo XC40 2025 (US import) – Radio stops working properly after changing frequency r (/showthread.php?tid=1484)
Volvo XC40 2025 (US import) – Radio stops working properly after changing frequency r - pacholekck - 11-13-2026
Hi everyone,
I'm having an issue with the radio in my 2025 Volvo XC40 imported from the US to Poland, and I'm hoping someone here might have experienced something similar.
The problem is related to the radio frequency settings in Orbit.
With the original US settings, the radio works perfectly fine. It finds around a dozen radio stations, and I can switch between them without any problems, both using the infotainment screen and the steering wheel controls. The only limitation is that I can only tune into stations with odd decimal frequencies (e.g. 95.1, 95.3, 95.5 MHz), as expected with the US frequency spacing.
However, when I change the Radio Frequency setting in Orbit to EU/RoW, something strange happens.
After making this change, the station list shows around a dozen stations, including both odd and even decimal frequencies. So, apparently, the system is now detecting the European frequencies correctly.
The problem is that only one station actually works – the station that was tuned in right before I changed the setting in Orbit.
I cannot switch to any other station. Neither tapping a different station on the infotainment screen nor using the steering wheel controls does anything. The station list is visible, but selecting another station simply doesn't work.
I've already tested this several times. Each time, I reverted to the original US settings in Orbit, confirmed that everything was working normally again, and then switched back to EU/RoW. The result is always exactly the same.
Has anyone encountered this issue before? Is there perhaps another setting or configuration that needs to be changed alongside the Radio Frequency option?
I'd really appreciate any suggestions or advice.
Thanks in advance!