+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: Replacing height sensors on 2018 xc90…will this calibrate? (/showthread.php?tid=1409)
Replacing height sensors on 2018 xc90…will this calibrate? - gotwood - 08-02-2026
Ball sockets on the front right and left height sensor arms seized up and the arms detached from the sensor spindles.
I have no way to reattach the arms as i don’t know where the arms should be attached on the spindles rotational angle.
So if i buy new arms will this software work to calibrate the voltages output from the sensors?
Right now i turned the spindles to say it was at highest height so it bleed out the air