OrBit Forums
OrBit v1.3.4 release notes - Printable Version

+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: OrBit Application (https://forums.spaycetech.com/forumdisplay.php?fid=9)
+--- Forum: Releases (https://forums.spaycetech.com/forumdisplay.php?fid=11)
+--- Thread: OrBit v1.3.4 release notes (/showthread.php?tid=1377)



OrBit v1.3.4 release notes - Power6 - 07-23-2026

OrBit 1.3.4 is released! This update introduces a couple new features as well as some refinements of the back end, updates to the user interface, and normal bug fixes. We are failing at more frequent releases, so here we are in July...

(Latest version of OrBit can always be downloaded here:https://app.spaycetech.com/orbitupdate/download) The "update notification" in OrBit will be sent later, but you can download the updated install right away from the link.


New features:

Car information display - Model and other basic car information of the connected car is shown in the main tab now renamed Dashboard (formerly "Shortcuts"). 

Add Activate in-tank Fuel Pump - The electric fuel pump can be activated to support service, to transfer fuel inside the "saddle" type fuel tank.

New Service Procedures  **New procedures are published outside of OrBit software updates, however I call them out here as some require new version of OrBit to support them and they are not otherwise announced:

Infotainment - Active Noise Control Disable (for Android IHU)
Suspension - Position Sensor Calibration (Four-C / No Air Susp)
Engine - Reset EGR Adaptation, IEM Gen1&2 - Calibration
ADBLUE - Reset adaptations - (for all 4 equipment replacements)
Transaxle - Gear Position Sensor Calibration
ECM - Reset Adaptations - Fuel Injector X (all 4 injectors for diesl models that support)
AWD(DEM) - Oil Pressure Pump Venting
Security - Wake up Phone as Key Module (PAKM) from Transport Mode
Safety - SRS Calibrate Inertial Sensors (for Bosch SRS modules) 


Updated Features:

Battery and oil level display correct for all models - Displays for HV battery State of Charge (SoC) and State of Health (SoH) were previously incorrect for some years/models as well as oil level not displayed for cars with Bosch ECM. This should now be correct for all support models.

Disconnected car handling and keep alive- OrBit now disconnects when the connected car is missing. OrBit also monitors the connection present to a car when disconnected to prevent the car from sleeping so it is available to connect without needing to wake it by re-plug the VOE adapter. 

Software package download improvments- OrBit now provides error message feedback when unable to download software files needed for a package, if download fails, Internet is unreachable etc. Custom files are now supported for car specific installs, all files can be downloaded. Included is improved logging for better support help.

PIN Decoding progress- Add progress bar when running PIN decoding on Wireshark captures, so progress can be seen when parsing and cracking PINs on large Wireshark capture files.

CEM Flashing recovery- Easier recovery from failed CEM flash when the CEM is not responding, when attempting flash again OrBit recognizes the CEM is not responding and passes checks to proceed to flashing software to recover the CEM back to normal operation.


Improvements and Fixes:

FLC2 Safety Camera Calibration- Fixed multiple bugs preventing calibration of the front facing camera, corrected allowed distance measurement range etc.

Update diagnostics support for 2026.5/2027 models - Handle the update CEM security. Note we can still not support config on these secured new models.

Connection quality warning - Adjusted limits to warn less frequently about connection quality when the risk of a problem is low.

Mounted ECUs/faster profile updates- OrBit now keeps track of the ECUs (modules) that should be mounted in the car, to process profile updates faster and deal with missing modules better. 

Service Procedures- Results handling is improved to reduce the instance of false positives, i.e. procedure successful but OrBit still displays an error return.

Various bug fixes and reliability improvments- The catch all, just like Volvo release notes!