+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: Polestar Optimisation not present... (/showthread.php?tid=1275)
Polestar Optimisation not present... - lilmountain - 04-05-2026
Hi all,
Uk Orbit noob here trying Orbit out for the first time on my 'new' V90 R Design Pro 2019 T5. I seem to have quite a lot of options missing in the configuration tab including any kind of Polestar options. Only plugged Orbit in the once so far and did the Auto SS with memory option which worked but a few other things that didn't (for another thread perhaps). When I enter my VIN on the official Polestar website it comes up with the below benefits;
Power Mid-Range up to (hp)
Original:
174
Optimised:
200
(+15%)
Power Mid-Range up to (kW)
Original:
128
Optimised:
147
(+15%)
Power & Torque Mid-Range max starting from rpm shown.
Original:
350
Optimised:
400
(+14%)
Peak Power (hp)
Original:
254
Optimised:
261
(+3%)
Peak Power (kW)
Original:
187
Optimised:
192
(+3%)
Peak Power (rpm)
Original:
5500
Optimised:
5700
Peak Torque (Nm)
Original:
350
Optimised:
400
(+14%)
Peak Torque (rpm)
Original:
1500-4800
Optimised:
2500-3500
Acceleration 0-100 km/h (s)
Original:
7
Optimised:
6.9
(-1%)
Engine code
10
So I know that Orbit will only optmise the transmission part which is fine, I just wanted to try that before committing to the £575 that my local dealer charges for the full deal but it's not an option on Orbit at all. Am I doing something wrong, is there a way to unlock this within Orbit or if it's not's there as an option it simply isn't?
Thanks in advance for any thoughts.
RE: Polestar Optimisation not present... - Terence - 04-05-2026
Hi!
The config id is 374 Polestar level. Choose 02 Polestar optimization.
You have to click display: everything as in picture below to see all config options.
RE: Polestar Optimisation not present... - AlphaOmega - 04-05-2026
You need to tick 'Everything' in the top right on the 'configurator' tab!
