+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: General (https://forums.spaycetech.com/forumdisplay.php?fid=1)
+--- Forum: OrBit Q&A - Ask your questions here! (https://forums.spaycetech.com/forumdisplay.php?fid=24)
+--- Thread: IHU Programming PIN (/showthread.php?tid=1196)
IHU Programming PIN - jos - 02-02-2026
Hi,
while i captured a vida software update session i was able to extract my pins.
(I simply talked a lot of nonsense to a service manager at my local Volvo dealer, and then it was possible.)
All of their garage notebooks had local admin rights
Can someone tell me for what this programming pin is needed?
Best Regards
RE: IHU Programming PIN - x119 - 02-02-2026
IHU PIN is generic, it's needed for software flashing.
It's 4948553031
Anything starting with 4C has been calculated as a possible PIN by OrBit using a seed/key exchange.
RE: IHU Programming PIN - jos - 02-03-2026
Ok but for use with Orbit in AAOS i just need the VGM and CEM right?
RE: IHU Programming PIN - x119 - 02-03-2026
Correct.
IHU only included above because it was found in log.