+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Misc (https://forums.spaycetech.com/forumdisplay.php?fid=16)
+--- Thread: Use auto hold button as Start/Stop with memory instead of no button and off possible? (/showthread.php?tid=1127)
Use auto hold button as Start/Stop with memory instead of no button and off possible? - jos - 12-06-2025
Hi,
is there a way to use my "Auto Hold" button (S60 2023) for 271 Start/stop memory to button with memory just by config change (what needs to be done additionally than 271 if so?) or is a wire change needed for that?
Best Regards JOS
RE: Use auto hold button as Start/Stop with memory instead of no button and off possible? - IMAY2023 - 12-07-2025
Simple answer is "Nope"
It's a whole LIN slave unit. Each button sends a different message. Besides, auto start / stop button has never been a physical button on VOLVOs. It's always been an option on the main car functions screen.
RE: Use auto hold button as Start/Stop with memory instead of no button and off possible? - BeachBoy - 12-09-2025
(12-07-2025, 06:01 AM)IMAY2023 Wrote: Simple answer is "Nope"You could however inject the drive mode command to switch to individual which can be set to remove start/stop
It's a whole LIN slave unit. Each button sends a different message. Besides, auto start / stop button has never been a physical button on VOLVOs. It's always been an option on the main car functions screen.
Or you can set the car to Police/VIP and there will be no more start stop at all.
Sent from my Pixel 9 Pro XL using Tapatalk