Volvo S90 Retrofit B&W - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3) +--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13) +--- Thread: Volvo S90 Retrofit B&W (/showthread.php?tid=1116)

Volvo S90 Retrofit B&W - ibidul - 11-26-2025 Hello, I have ordered a full B&W speaker set for volvo s90, I've opened up the door panels on the rear door, and see there are no mounting point for the tweeters, for the midrange there are some holes for screws to go into, does anyone know what screws i need and/or how i can mount the tweeters. Also, i have a green connector coming to where speakers should be but arent on my base audio. the connector has 4 wires going into it from the back so im assuming it could be for the missing speakers, does this mean i can just cut the connector and wire up the speakers or does it probably lead to no where on the amp side. Any help is greatly appreciated thanks RE: Volvo S90 Retrofit B&W - IMAY2023 - 11-26-2025 The connector in the picture you attached is for the lock switch.  The speaker connectors are grey with two pins.  If you do not have those, you also do not have the MID + High output wiring from the AUD (under the passenger seat) to the each door connector too.