+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: RSI Settings question (/showthread.php?tid=1091)
RSI Settings question - NikitaPodhornyi - 11-03-2025
Hi all,
I have 2020 V90 T8, and from factory it didnt have Sensus navigation enabled.
It was a simple parameter change in Orbit, and maps update, and now it works perfectly.
Changed parameter 223 from setting 01 to 04.
But i noticed that RSI (Speed limits) are not updated based on Navigation, but only read from real signs.
So a question, is there another parameter that determines where it takes the speed limit from, something like (real signs + navigation data)
Country of first reg is Sweden, current country of usage is Finland (maybe this plays a role as well)
I have driven another V90 county of origin was Belgium, and it had Sensus navigation enabled by default, and in there speed limit was fused correctly at all times.
RSI Settings question - Sieluck - 11-03-2025
Don't know but I have exactly the same situation. Sat nav enable in Orbit, car from Sweden. I changed road signs territory to middle Europe if I remember correctly but still the car does not know when I'm leaving 50km/h zone and showing 50 limit for a minute longer or so.
Wysłane z mojego CPH2581 przy użyciu Tapatalka