Xc60 park sensors - Printable Version +- OrBit Forums (https://forums.spaycetech.com) +-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3) +--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13) +--- Thread: Xc60 park sensors (/showthread.php?tid=1005)

Xc60 park sensors - Justinas - 08-27-2025 Hello. I have some problem with retrofit front park sensors. Car have only rear park sensors. Now I connected front to the cem, changed configuration front+rear, and allways getting this error. Front park sensors have clicking noise, all signals there on wiring. Any ideas ? Tried brown sensors, same errors RE: Xc60 park sensors - IMAY2023 - 08-27-2025 Either you have a short or wrong wiring. Sensors should not make clicking noise all the time. Only when they detect a close object. RE: Xc60 park sensors - Justinas - 08-28-2025 Okay. Do you maybe have wiring for xc60 ? I found here wiring where to connect pins 45 - 44 + 41,40,39,38 signals. It’s wrong pins ? They clicking only when starting car, not allways. I haven't check cem hardware if it’s low or high. I doubt that wiring bad, becouse when disconnecting any inner sensor error appears RE: Xc60 park sensors - Justinas - 08-28-2025 I have cem with HI letters RE: Xc60 park sensors - R1maS - 08-28-2025 2 possible options: 1 - Is small support battery OK? If not, replace it with new one 2 - If you have access to Vida, use CEM service procedure called "Enable disabled pins"