OrBit Forums
Retrofit Keyless Entry - Printable Version

+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit Keyless Entry (/showthread.php?tid=152)

Pages: 1 2 3 4 5 6 7 8 9


RE: Retrofit Keyless Entry - Aliaksandr - 07-17-2024

(07-17-2024, 02:18 PM)Pliind Wrote:
(07-17-2024, 02:09 PM)Aliaksandr Wrote: I need to look specifically at the door handle with v60. Finding it in the trash is not so easy. Much from xc90.

Oh handle wise you can take from other models also, C40/XC40.

I usually cross reference all parts on swedish scrapyard sights and xc60 share same with v90 but i find no overlap from v60 to xc60.

Thank you!


RE: Retrofit Keyless Entry - Aliaksandr - 07-24-2024

How to connect the trunk opening antenna with your foot? I found this number 31419502
[Image: Czujnik-otwarcia-klapy-bagaznik-VOLVO-OE-31419502.jpg]


RE: Retrofit Keyless Entry - paunionutz - 07-28-2024

(07-24-2024, 06:47 PM)Aliaksandr Wrote: How to connect the trunk opening antenna with your foot? I found this number 31419502
[Image: Czujnik-otwarcia-klapy-bagaznik-VOLVO-OE-31419502.jpg]

You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same


RE: Retrofit Keyless Entry - Aliaksandr - 07-28-2024

(07-28-2024, 07:31 PM)paunionutz Wrote: You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same
I found a sensor with s60. I think it will fit. Can you tell me the pin numbers where to connect? Maybe you have a diagram?


RE: Retrofit Keyless Entry - IMAY2023 - 07-28-2024

(07-28-2024, 08:26 PM)Aliaksandr Wrote:
(07-28-2024, 07:31 PM)paunionutz Wrote: You need wiring from foot  movement sensor to  bumper connector (ground, lin signal), and from bumper connector 1 wire to BMS (has the same LIN), and 1 wire to CEM
PS: you must buy sensor for your platform, because the braket is not the same
I found a sensor with s60. I think it will fit. Can you tell me the pin numbers where to connect? Maybe you have a diagram?
https://forums.spaycetech.com/showthread.php?tid=455&highlight=wiring


RE: Retrofit Keyless Entry - Aliaksandr - 08-19-2024

Do we know what pins are used in the door connectors? I have everything except these pins. I do the wiring myself.


RE: Retrofit Keyless Entry - Aliaksandr - 08-19-2024

Here's what I found. Looks like they should work. 962943+964265-2 Contact Lira 1.2 socket + pin for wire cross-section 0.35-0.75 mm;

[Image: IMG-20240819-110859.jpg] [Image: IMG-20240819-110923.jpg] [Image: IMG-20240819-110936.jpg]

[Image: IMG-20240819-110940.jpg] [Image: IMG-20240819-111003.jpg] [Image: IMG-20240819-111010.jpg]

[Image: IMG-20240819-111016.jpg] [Image: IMG-20240819-111138.jpg] [Image: IMG-20240819-111141.jpg]


RE: Retrofit Keyless Entry - Aliaksandr - 08-19-2024

Pins for CEM FL, EN. 6206421005 (1393366-1), Contact-socket 0.5-0.75mm² for connectors of the .64 series (1-1419168-1). I used pins from OEM connector 1-1419168-1
[Image: IMG-20240519-141153.jpg] [Image: IMG-20240519-141211.jpg] [Image: IMG-20240519-141211-1.jpg]

[Image: IMG-20240519-141255.jpg] [Image: IMG-20240519-141301.jpg] [Image: IMG-20240519-141303.jpg]

[Image: IMG-20240519-141321.jpg] [Image: IMG-20240519-141322.jpg] [Image: IMG-20240519-141357.jpg]


RE: Retrofit Keyless Entry - Aliaksandr - 08-19-2024

Help me. Everything is assembled, I just don't know the pin numbers.

[Image: 2024-08-19-215210.png]

I have already installed the car parking. You ask. There will be more of a report further. There are many questions. I encounter them and I will tell you.


RE: Retrofit Keyless Entry - Aliaksandr - 08-20-2024

I drew the holder. Here is the stl antenna mount.

https://drive.google.com/file/d/1weeM6XfANsCUIHA7nso3F_2WsBKh6wzs/view?usp=sharing

[Image: IMG-20240820-203100.jpg]
[Image: 2024-08-20-203145.png]

This is the pinout.

[Image: 2024-08-20-203943-2.png]