+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit T8 Brakes - 345/320mm to 366/340mm (/showthread.php?tid=98)
RE: Retrofit T8 Brakes - 345/320mm to 366/340mm - Necse6alex - 10-08-2025
So , after all i can make the upgrade to 366 without any modifications on the software. ? Right ?
RE: Retrofit T8 Brakes - 345/320mm to 366/340mm - x119 - 10-08-2025
You should change the config so the ABS system behaves as expected.
RE: Retrofit T8 Brakes - 345/320mm to 366/340mm - Necse6alex - 10-08-2025
(10-08-2025, 11:54 AM)x119 Wrote: You should change the config so the ABS system behaves as expected.
I saw some users after do that has dtc errors...
RE: Retrofit T8 Brakes - 345/320mm to 366/340mm - sutit95 - 08-17-2026
Hello, so in my case, i want to upgrade the brakes T5 xc60, i found 2 types of brake calipers, 19"" from V60 polestar or 20"" from XC60 polestar
final verdict what it is ? do we need to configure something in Orbit configuration ?
i have another car with brake calipers upgrade, passat b7 from 315 to 345, and i also modify the ABS parameters to have the same pressure of boost like 345 brake calipers, so from my perspective there is an necessary configuration to the ABS module to know that you have a much bigger calipers that are using much more boost pressure.
let me know the final verdict
thank you.