+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit heated steering wheel problem. Help! (/showthread.php?tid=765)
RE: Retrofit heated steering wheel problem. Help! - Orman - 02-07-2025
Ah ok. The part was tested OK before disassembly, so it should be working. I have no other way of confirming that myself, so I’m just going to assume it is. My original part is manufactured 2019, and the replacement I purchased is manufactured 2020, in a different country as well. All the other numbers printed except part number doesn’t match either. I don’t know if that has anything to do with it.
![[Image: IMG-0306.jpg]](https://i.ibb.co/67kZJ7K3/IMG-0306.jpg)
![[Image: IMG-0307.jpg]](https://i.ibb.co/V00gWMtb/IMG-0307.jpg)
RE: Retrofit heated steering wheel problem. Help! - IMAY2023 - 02-07-2025
Part numbers always change for same exact parts almost every year. I do not see the picture but search for your original part number or the replacement part in google or here https://usparts.volvocars.com/ . They should be Supersession(s) of each other. You can even get a third different part number as the current one.
RE: Retrofit heated steering wheel problem. Help! - Orman - 02-10-2025
Solved.
Volvo dealer reloaded the software and everything is working correctly now.
RE: Retrofit heated steering wheel problem. Help! - Han_91 - 06-06-2025
Hey,
I recently did the retrofit myself, and after a wrong steering module giving lots of fault codes I decided to buy a brand new module (32350377). Everything is working now again, except that when the dealer wants to install the module with vida they get a fault code that the hardware is not suited for the car as it didn’t come from the factory with a heated steering wheel. Also my dealer said they never heard that this could be done, so they don’t know what software is needed to program it. So my questions are: Does anyone know what software is needed to install the heated steering on my car? Is it even an option to do in Europe? Do you for instance have to tell Volvo in Sweden about the hardware change?(this was something my dealer thought might would be needed)
The car is luckily completely working now, so if it’s a big job to do I think I leave it with this and let the hardware code not bother me. But I would like to get it officially installed so I don’t get in trouble with Volvo for the updates.
RE: Retrofit heated steering wheel problem. Help! - Kenn - 06-30-2025
(02-10-2025, 05:04 PM)Orman Wrote: Solved.
Volvo dealer reloaded the software and everything is working correctly now.
Great!
How much did he charge you for it?
RE: Retrofit heated steering wheel problem. Help! - Orman - 06-30-2025
(Yesterday, 05:11 PM)Kenn Wrote:(02-10-2025, 05:04 PM)Orman Wrote: Solved.
Volvo dealer reloaded the software and everything is working correctly now.
Great!
How much did he charge you for it?
They charge hourly rate at 130 euro, with minimum being 1 hour even though it only took 15 minutes, so I paid 130 euro.
Initially the dealer told me Volvo doesn’t allow reloading of software on used parts for safety critical components, and showed me a PDF supplied to the dealer by Volvo themselves with a list of which parts specifically, with steering wheel module being one of them. Most likely because the airbag wires passes through it. I’m guessing they probably don’t want the liability if they helped you code a faulty used component and then the airbag doesn’t set off if you get into an accident.
They said I had to buy a new one which was 620 euro for just the part alone, which will also need loading of software for additional 130 euro. I said that ain’t happening so just try to reload the software anyway, and even they were surprised when it worked no problem.
RE: Retrofit heated steering wheel problem. Help! - Sodertalje - 07-01-2025
(Yesterday, 05:39 PM)Orman Wrote:(Yesterday, 05:11 PM)Kenn Wrote:(02-10-2025, 05:04 PM)Orman Wrote: Solved.
Volvo dealer reloaded the software and everything is working correctly now.
Great!
How much did he charge you for it?
They charge hourly rate at 130 euro, with minimum being 1 hour even though it only took 15 minutes, so I paid 130 euro.
Initially the dealer told me Volvo doesn’t allow reloading of software on used parts for safety critical components, and showed me a PDF supplied to the dealer by Volvo themselves with a list of which parts specifically, with steering wheel module being one of them. Most likely because the airbag wires passes through it. I’m guessing they probably don’t want the liability if they helped you code a faulty used component and then the airbag doesn’t set off if you get into an accident.
They said I had to buy a new one which was 620 euro for just the part alone, which will also need loading of software for additional 130 euro. I said that ain’t happening so just try to reload the software anyway, and even they were surprised when it worked no problem.
That is nuts. A new SWM costs around 140 euro, software is 29 I think. I know you have to add some labor, but 640 Euro for a part that costs 140 Euro is a total; rip off. I have one here, it's for sale for 75 euro excluding shipping for anyone who wants it.