+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Lights (https://forums.spaycetech.com/forumdisplay.php?fid=4)
+--- Thread: Default to active high beams? (/showthread.php?tid=121)
Pages:
1
2
RE: Default to active high beams? - xc60P* - 03-02-2024
(06-07-2023, 01:39 AM)A-P Wrote: Thanks - that's helpful. Just for others who may stumble upon this thread -- in spite of the U2300 error, I just verified the full functionality of the US-spec Pixel headlamps under the Type B (106 -> 12) setting above.Following up on this I’ve just got adaptive high beams to work. Did the change from matrix a to matrix b make any visual difference? I don’t need “always on”. I can turn a know each time.
Specifically,
- Welcome / Goodbye pattern (or whatever that is called)
- Side reflector lights (the orange ones, which I don't think are present on the EU spec, but still work)
- Matrix functionality
- Auto leveling
- Beam steering
I couldn't really see a difference in the above vs. when 106 was set to Type A (11).
I'll check again if the DTC shows up tomorrow, but either way seems like it may be more informational in nature given the Type A/B hardware seems fairly similar.
Cheers,
AP
Thx.
RE: Default to active high beams? - BuiltInBelgium - 08-27-2024
(06-07-2023, 01:39 AM)A-P Wrote: Thanks - that's helpful. Just for others who may stumble upon this thread -- in spite of the U2300 error, I just verified the full functionality of the US-spec Pixel headlamps under the Type B (106 -> 12) setting above.
Specifically,
- Welcome / Goodbye pattern (or whatever that is called)
- Side reflector lights (the orange ones, which I don't think are present on the EU spec, but still work)
- Matrix functionality
- Auto leveling
- Beam steering
I couldn't really see a difference in the above vs. when 106 was set to Type A (11).
I'll check again if the DTC shows up tomorrow, but either way seems like it may be more informational in nature given the Type A/B hardware seems fairly similar.
Cheers,
AP
Any luck keeping AHB enabled withour a DTC reoccurring? I have non-Pixel headlamps.
RE: Default to active high beams? - chess - 09-05-2024
I'm running into the same DTC U2300 as well. I have a 2017 Volvo XC90 T6 with non-pixel thor hammer headlights. It came with auto bending lights (low beam) from factory and I have enabled ABHB2 (small village). Is that the one causing the error?
I'm not sure as I have enabled a bunch of settings. Anyone have figured it out, please guide!
RE: Default to active high beams? - chess - 09-05-2024
(09-05-2024, 01:21 AM)chess Wrote: I'm running into the same DTC U2300 as well. I have a 2017 Volvo XC90 T6 with non-pixel thor hammer headlights. It came with auto bending lights (low beam) from factory and I have enabled ABHB2 (small village). Is that the one causing the error?
I'm not sure as I have enabled a bunch of settings. Anyone have figured it out, please guide!
Solved using this excellent troubleshooting post Shell Rotella T6 Multi-Vehicle Full Synthetic