+- OrBit Forums (https://forums.spaycetech.com)
+-- Forum: Configuration Items (https://forums.spaycetech.com/forumdisplay.php?fid=3)
+--- Forum: Retrofitting (https://forums.spaycetech.com/forumdisplay.php?fid=13)
+--- Thread: Retrofit Keyless Entry (/showthread.php?tid=152)
RE: Retrofit Keyless Entry - Marcp - 04-25-2025
Hello! Thank you very much for confirming my debt. I'm leaving the pins I purchased here to help others.
- Terminal pin for CEM FL connector, original Volvo reference 30656698
- Terminal pin for CEM FO connector, verified IL-AG5-C1-5000
- Door handle connector
https://a.aliexpress.com/_EutQDTG
- Pins for the door module connector
https://a.aliexpress.com/_EQrzhXG
This one needs to be verified, but it's the same connector.
I'll confirm when I assemble it.
Thanks!
RE: Retrofit Keyless Entry - hexaust - 05-05-2025
How can I know if a door harness has keyless entry or not? For example this one:
![[Image: s-l1600.webp]](https://i.ebayimg.com/images/g/RgQAAOSwMQlnclqW/s-l1600.webp)
RE: Retrofit Keyless Entry - TweakeNL - 05-06-2025
(05-05-2025, 07:17 AM)hexaust Wrote: How can I know if a door harness has keyless entry or not? For example this one:
This one does have the plug for the handle. You can see it on the left side. It goes through the "door module" via that rubber grommet to the lock and the handle. (Handle is the small connector.)
RE: Retrofit Keyless Entry - Marcp - 05-17-2025
Please, can you help?
I can't find the fault.
Everything is assembled and connected, the handlebar lights work, but it's giving this error:
CEM: B14F5 Driver Door Handle-- General electrical failure
This weekend, I swapped the front and rear levers, replaced the handlebar connector, checked all the wiring and the CEM connector, and everything is fine.
I also want to say that the handlebar lights turn on.
I don't know what else to try...
RE: Retrofit Keyless Entry - TweakeNL - 05-22-2025
Do a continuity test between the handle connector and the CEM connector. Just ensure that everything is connected correctly.
Lights are separately controlled. Just the one communication wire to the CEM.
RE: Retrofit Keyless Entry - Marcp - 06-21-2025
Hi, guys! Is it normal that when there's a DTC on the front left lever, nothing works?
RE: Retrofit Keyless Entry - TweakeNL - 07-02-2025
(06-21-2025, 06:44 PM)Marcp Wrote: Hi, guys! Is it normal that when there's a DTC on the front left lever, nothing works?
Yes, everything must be working OK, otherwise system will be deactivated.