https://forums.spaycetech.com/ Wed, 29 Apr 2026 21:54:04 +0000 MyBB https://forums.spaycetech.com/showthread.php?tid=1289 Sun, 19 Apr 2026 19:02:18 +0000 Apansson]]> https://forums.spaycetech.com/showthread.php?tid=1289
I’ve got an P2 2021 which doesn’t have wireless carplay in its spec.

Now I’m looking for a similar car for a friend and found a 2022. When checking its factory spec it says: 8G0B Wireless device mirroring, CarPlay & AndroidAuto.
Does later model cars have wireless carplay?]]>
I’ve got an P2 2021 which doesn’t have wireless carplay in its spec.

Now I’m looking for a similar car for a friend and found a 2022. When checking its factory spec it says: 8G0B Wireless device mirroring, CarPlay & AndroidAuto.
Does later model cars have wireless carplay?]]> https://forums.spaycetech.com/showthread.php?tid=1255 Sat, 21 Mar 2026 22:26:20 +0000 sdca_xc40plus]]> https://forums.spaycetech.com/showthread.php?tid=1255
After upgrading to 5.05 this slider is now gone. Sub still sounds, but volume is fixed and too low.

Anybody else has similar experience? Is removal of SW volume slider a new anti-feature in 5.05 for stock audio? YouTube videos seem to still show the slider for HK audio but not sure.

It is possible that the regular BASS tone control now acts as a Subwoofer volume control rather than a traditional tone control, but I would have to do some more testing to figure out if that's the case. Regardless, I'd like higher SW volume.

Grateful for any input here.]]>
After upgrading to 5.05 this slider is now gone. Sub still sounds, but volume is fixed and too low.

Anybody else has similar experience? Is removal of SW volume slider a new anti-feature in 5.05 for stock audio? YouTube videos seem to still show the slider for HK audio but not sure.

It is possible that the regular BASS tone control now acts as a Subwoofer volume control rather than a traditional tone control, but I would have to do some more testing to figure out if that's the case. Regardless, I'd like higher SW volume.

Grateful for any input here.]]> https://forums.spaycetech.com/showthread.php?tid=1241 Sat, 14 Mar 2026 18:38:50 +0000 bas.apirak]]> https://forums.spaycetech.com/showthread.php?tid=1241
I just swap all speakers and amp from high performance to B&W on my S90 MY18. I used config wizard to change audio but unfortunately turn signal sound and front proximity sensors is VERY muted.

Could you please advice how to fix this?

Thanks.]]>
I just swap all speakers and amp from high performance to B&W on my S90 MY18. I used config wizard to change audio but unfortunately turn signal sound and front proximity sensors is VERY muted.

Could you please advice how to fix this?

Thanks.]]> https://forums.spaycetech.com/showthread.php?tid=1209 Tue, 10 Feb 2026 17:11:16 +0000 jos]]> https://forums.spaycetech.com/showthread.php?tid=1209
I liked the idea of having a dedicated “car iPhone” instead of using my main phone. The car iPhone stays permanently in the center console armrest, goes into airplane mode when not charging, and is only used for CarPlay.

By default, when I get into the car, the car iPhone powers up, exits airplane mode, and CarPlay connects automatically.

If needed, I can open the armrest and gently press the spot where the USB switch button is hidden under the rubber mat. That switches CarPlay to my CarPlay dongle, which then connects to my main iPhone in my jacket.

There are also USB-C switches available with a remote button on a 2 m cable. If someone really wants to perfect the setup, mounting that button in an unused spot in the cockpit would be pretty cool — unfortunately, there’s no suitable unused button in the 2023 S60.


Best Regards JOS]]>
I liked the idea of having a dedicated “car iPhone” instead of using my main phone. The car iPhone stays permanently in the center console armrest, goes into airplane mode when not charging, and is only used for CarPlay.

By default, when I get into the car, the car iPhone powers up, exits airplane mode, and CarPlay connects automatically.

If needed, I can open the armrest and gently press the spot where the USB switch button is hidden under the rubber mat. That switches CarPlay to my CarPlay dongle, which then connects to my main iPhone in my jacket.

There are also USB-C switches available with a remote button on a 2 m cable. If someone really wants to perfect the setup, mounting that button in an unused spot in the cockpit would be pretty cool — unfortunately, there’s no suitable unused button in the 2023 S60.


Best Regards JOS]]> https://forums.spaycetech.com/showthread.php?tid=1200 Thu, 05 Feb 2026 16:55:59 +0000 TaKu88]]> https://forums.spaycetech.com/showthread.php?tid=1200 Is there any setting to change that?]]> Is there any setting to change that?]]> https://forums.spaycetech.com/showthread.php?tid=1161 Mon, 12 Jan 2026 08:09:13 +0000 Sodertalje]]> https://forums.spaycetech.com/showthread.php?tid=1161
Anyone who has this also and is there a solution to it?]]>
Anyone who has this also and is there a solution to it?]]> https://forums.spaycetech.com/showthread.php?tid=1144 Sat, 20 Dec 2025 20:51:45 +0000 S0n1c]]> https://forums.spaycetech.com/showthread.php?tid=1144
I know the IHU has been a black box for these cars. But I was hoping someone has made any kind of headway figuring them out. 

My IHU is annoying since it’s a ‘21 model, so it’s the oldest of the intel atom chips. It acts weird, overheats a lot, and just generally sucks. Anything I can do to try to make it better is what I’m after.

I have a ‘21 xc40 recharge if that’s of any value.]]>
I know the IHU has been a black box for these cars. But I was hoping someone has made any kind of headway figuring them out. 

My IHU is annoying since it’s a ‘21 model, so it’s the oldest of the intel atom chips. It acts weird, overheats a lot, and just generally sucks. Anything I can do to try to make it better is what I’m after.

I have a ‘21 xc40 recharge if that’s of any value.]]> https://forums.spaycetech.com/showthread.php?tid=1111 Wed, 19 Nov 2025 18:45:06 +0000 jos]]> https://forums.spaycetech.com/showthread.php?tid=1111
is there something i can do to have a bigger speedo in my V60 from 2023, if i remove the limiter from 180kph to 200+ it would be great if the speedo would have a gauge which can show more than 200.

Is this something i should try? https://forums.spaycetech.com/showthread.php?tid=1109


Best Regards JOS]]>
is there something i can do to have a bigger speedo in my V60 from 2023, if i remove the limiter from 180kph to 200+ it would be great if the speedo would have a gauge which can show more than 200.

Is this something i should try? https://forums.spaycetech.com/showthread.php?tid=1109


Best Regards JOS]]> https://forums.spaycetech.com/showthread.php?tid=1109 Tue, 18 Nov 2025 00:10:20 +0000 yalud]]> https://forums.spaycetech.com/showthread.php?tid=1109
  Screenshot_20251117_155940_Instagram.jpg (Size: 176.64 KB / Downloads: 322) ]]>
  Screenshot_20251117_155940_Instagram.jpg (Size: 176.64 KB / Downloads: 322) ]]> https://forums.spaycetech.com/showthread.php?tid=1042 Thu, 25 Sep 2025 18:06:09 +0000 Zoomug]]> https://forums.spaycetech.com/showthread.php?tid=1042 Hi everyone,

I recently purchased a pair of Focal 10cm speakers to replace the stock OEM speakers in the front door cards of my XC40.
The original speakers use a 3-screw mounting system, while the Focals come with the standard 4-screw hole configuration. I've 3D printed an adapter to help with the installation, but I'm a bit stuck on how to actually mount them.
From what I can tell, it seems like I might need to trim or remove two of the mounting tabs (ears) on the Focal speakers to get them to fit properly into the existing opening in the door card.
Has anyone done this upgrade before or have any tips on how to make it work?

  WhatsApp Image 2025-09-25 at 19.04.51_5c78ca7b.jpg (Size: 130.52 KB / Downloads: 52)
  WhatsApp Image 2025-09-25 at 19.04.51_2398069c.jpg (Size: 107.92 KB / Downloads: 52)
Any advice would be greatly appreciated—thanks!]]> Hi everyone,

I recently purchased a pair of Focal 10cm speakers to replace the stock OEM speakers in the front door cards of my XC40.
The original speakers use a 3-screw mounting system, while the Focals come with the standard 4-screw hole configuration. I've 3D printed an adapter to help with the installation, but I'm a bit stuck on how to actually mount them.
From what I can tell, it seems like I might need to trim or remove two of the mounting tabs (ears) on the Focal speakers to get them to fit properly into the existing opening in the door card.
Has anyone done this upgrade before or have any tips on how to make it work?

  WhatsApp Image 2025-09-25 at 19.04.51_5c78ca7b.jpg (Size: 130.52 KB / Downloads: 52)
  WhatsApp Image 2025-09-25 at 19.04.51_2398069c.jpg (Size: 107.92 KB / Downloads: 52)
Any advice would be greatly appreciated—thanks!]]> https://forums.spaycetech.com/showthread.php?tid=982 Thu, 07 Aug 2025 16:27:15 +0000 Paolo]]> https://forums.spaycetech.com/showthread.php?tid=982 Good evening,
Can you tell me if the rearview camera is connected directly to the IHU? I think it's the brown female connector.
Is it then necessary to activate it only with Orbit? Volvo V60 2020
   ]]> Good evening,
Can you tell me if the rearview camera is connected directly to the IHU? I think it's the brown female connector.
Is it then necessary to activate it only with Orbit? Volvo V60 2020
   ]]> https://forums.spaycetech.com/showthread.php?tid=968 Sat, 26 Jul 2025 19:21:47 +0000 Zoomug]]> https://forums.spaycetech.com/showthread.php?tid=968
What I was wondering if there is any sort of rubber mount/insert between the mounting bolts and the car body 

so that It doesn't vibrate the rear of the car like its doing now. 

Sounds noisy outside, vibrating the rear light cluster etc.

Thanks

Dave]]>
What I was wondering if there is any sort of rubber mount/insert between the mounting bolts and the car body 

so that It doesn't vibrate the rear of the car like its doing now. 

Sounds noisy outside, vibrating the rear light cluster etc.

Thanks

Dave]]> https://forums.spaycetech.com/showthread.php?tid=964 Wed, 23 Jul 2025 13:31:55 +0000 Xc602019]]> https://forums.spaycetech.com/showthread.php?tid=964 Thanks]]> Thanks]]> https://forums.spaycetech.com/showthread.php?tid=885 Thu, 22 May 2025 09:08:13 +0000 SlapNutz]]> https://forums.spaycetech.com/showthread.php?tid=885
A quick question before I dip into buying orbit, I have a Volvo XC90 2016 and I have I believe the following setup with an amplifier not HK or b&w, i know I have 10 speakers in the front and back doors haven't checked the headliner but grills are there.

Question is I managed to pickup a HK amplifier and plugged it in and was able to see the equaliser change from 5 to 7 or more but the sound wasn't right.

Volume was low and couldn't hear any vocals it was mostly music and in mid also the bass was very echoey and mid like.

Is it because I need to change the sound profile via or it for it to work properly? 

I'm happy with the current amount of speakers I have just would like more oomph.

Is the above because I'm missing speakers or because I need to adjust the sound profile to match amplifier or is the base wiring different from HK.

My current amp has 

Power connector
Optical connecter 
2 speaker connectors.

Should this be a simple plug and play amp swap? Or adjustments need to be made after amp change?

Regards
Slapz]]>
A quick question before I dip into buying orbit, I have a Volvo XC90 2016 and I have I believe the following setup with an amplifier not HK or b&w, i know I have 10 speakers in the front and back doors haven't checked the headliner but grills are there.

Question is I managed to pickup a HK amplifier and plugged it in and was able to see the equaliser change from 5 to 7 or more but the sound wasn't right.

Volume was low and couldn't hear any vocals it was mostly music and in mid also the bass was very echoey and mid like.

Is it because I need to change the sound profile via or it for it to work properly? 

I'm happy with the current amount of speakers I have just would like more oomph.

Is the above because I'm missing speakers or because I need to adjust the sound profile to match amplifier or is the base wiring different from HK.

My current amp has 

Power connector
Optical connecter 
2 speaker connectors.

Should this be a simple plug and play amp swap? Or adjustments need to be made after amp change?

Regards
Slapz]]> https://forums.spaycetech.com/showthread.php?tid=843 Thu, 10 Apr 2025 17:34:04 +0000 michaelmiata89]]> https://forums.spaycetech.com/showthread.php?tid=843