https://forums.spaycetech.com/ Sun, 17 May 2026 02:34:52 +0000 MyBB https://forums.spaycetech.com/showthread.php?tid=1317 Fri, 15 May 2026 00:37:05 +0000 Lim Dea woong]]> https://forums.spaycetech.com/showthread.php?tid=1317 https://forums.spaycetech.com/showthread.php?tid=1313 Sat, 09 May 2026 17:13:02 +0000 instigator008]]> https://forums.spaycetech.com/showthread.php?tid=1313
2020 XC60 T8

  Screenshot 2026-05-09 131148.png (Size: 766.53 KB / Downloads: 28) ]]>
2020 XC60 T8

  Screenshot 2026-05-09 131148.png (Size: 766.53 KB / Downloads: 28) ]]> https://forums.spaycetech.com/showthread.php?tid=1296 Fri, 24 Apr 2026 21:59:52 +0000 Proz]]> https://forums.spaycetech.com/showthread.php?tid=1296 I activated ACC PA2 on my XC60 D4 2019 a few months ago and all is fine. 
I have no warning lights of any kind. Everything seems normal and to be working fine. 
I put my IcarSoft code reader on the car today to look at something else but the code above was listed. 
Something about corrupted programming or something missing. 
Again I have no warning lights and the car appears fine. 
Should I be worried  ? 

BCM-U210856 – Adaptive Cruise Control – System Programming Failures – Invalid/incompatible configuration]]> I activated ACC PA2 on my XC60 D4 2019 a few months ago and all is fine. 
I have no warning lights of any kind. Everything seems normal and to be working fine. 
I put my IcarSoft code reader on the car today to look at something else but the code above was listed. 
Something about corrupted programming or something missing. 
Again I have no warning lights and the car appears fine. 
Should I be worried  ? 

BCM-U210856 – Adaptive Cruise Control – System Programming Failures – Invalid/incompatible configuration]]> https://forums.spaycetech.com/showthread.php?tid=1238 Thu, 12 Mar 2026 08:48:25 +0000 András]]> https://forums.spaycetech.com/showthread.php?tid=1238
is there a way to make the front sensors more reliable? They work really slow in my car, sometimes I only get the warning sounds after I already stopped really close to a wall/car/etc.

my car: 2019 V60]]>
is there a way to make the front sensors more reliable? They work really slow in my car, sometimes I only get the warning sounds after I already stopped really close to a wall/car/etc.

my car: 2019 V60]]> https://forums.spaycetech.com/showthread.php?tid=1149 Thu, 25 Dec 2025 13:36:05 +0000 Apansson]]> https://forums.spaycetech.com/showthread.php?tid=1149
I programmed a new key to my XC40. Since it was in for service software were updated. Now I both keys trigger the same driver profile and I can’t change it? I save the other profile to the other key but next time it reverts back to the wrong profile.

Any ideas?]]>
I programmed a new key to my XC40. Since it was in for service software were updated. Now I both keys trigger the same driver profile and I can’t change it? I save the other profile to the other key but next time it reverts back to the wrong profile.

Any ideas?]]> https://forums.spaycetech.com/showthread.php?tid=1148 Wed, 24 Dec 2025 20:18:53 +0000 erz]]> https://forums.spaycetech.com/showthread.php?tid=1148 https://forums.spaycetech.com/showthread.php?tid=1104 Fri, 14 Nov 2025 21:17:19 +0000 krzysztof.pyzel@o2.pl]]> https://forums.spaycetech.com/showthread.php?tid=1104 132. CUTOFF SWITCH PASSENGER AIRBAG
With Software Cut-Off Switch]]> 132. CUTOFF SWITCH PASSENGER AIRBAG
With Software Cut-Off Switch]]> https://forums.spaycetech.com/showthread.php?tid=1078 Sat, 01 Nov 2025 13:49:58 +0000 Marky mark]]> https://forums.spaycetech.com/showthread.php?tid=1078 I'm getting a signal issue to it and I cannot get the car to go into drive.

TA Mark]]> I'm getting a signal issue to it and I cannot get the car to go into drive.

TA Mark]]> https://forums.spaycetech.com/showthread.php?tid=1047 Sat, 04 Oct 2025 15:00:41 +0000 thermal-fixity]]> https://forums.spaycetech.com/showthread.php?tid=1047 https://forums.spaycetech.com/showthread.php?tid=1038 Tue, 23 Sep 2025 02:00:36 +0000 Evan9625]]> https://forums.spaycetech.com/showthread.php?tid=1038

Sent from my iPhone using Tapatalk]]>

Sent from my iPhone using Tapatalk]]> https://forums.spaycetech.com/showthread.php?tid=1031 Sat, 13 Sep 2025 09:32:33 +0000 juzzmee]]> https://forums.spaycetech.com/showthread.php?tid=1031 To those whom has retrofitted 360 camera and BLIS on 2019 XC40 T4, can I check what’s the control module or part number for it (silver box in the picture)?
Seller sent me the complete set with control module but apparently installer checked and mentioned it’s for XC60.
The control module cannot be connected to the CEM and even the passenger side mirror cannot be adjusted to angle to see the rear passenger door handle (adjusted max to the right). Seller said it’s because the software for 360 & BLIS is not yet activated thus the mirror angles are off - does it make sense?
Hope the pictures attached are working and i appreciate any advise on my above questions.
Nothing is going smoothly for my upgrades - argh.

  IMG_3046.jpeg (Size: 125.44 KB / Downloads: 136)

  IMG_3045.jpeg (Size: 218.16 KB / Downloads: 133)

  IMG_3047.jpeg (Size: 111.31 KB / Downloads: 130) ]]> To those whom has retrofitted 360 camera and BLIS on 2019 XC40 T4, can I check what’s the control module or part number for it (silver box in the picture)?
Seller sent me the complete set with control module but apparently installer checked and mentioned it’s for XC60.
The control module cannot be connected to the CEM and even the passenger side mirror cannot be adjusted to angle to see the rear passenger door handle (adjusted max to the right). Seller said it’s because the software for 360 & BLIS is not yet activated thus the mirror angles are off - does it make sense?
Hope the pictures attached are working and i appreciate any advise on my above questions.
Nothing is going smoothly for my upgrades - argh.

  IMG_3046.jpeg (Size: 125.44 KB / Downloads: 136)

  IMG_3045.jpeg (Size: 218.16 KB / Downloads: 133)

  IMG_3047.jpeg (Size: 111.31 KB / Downloads: 130) ]]> https://forums.spaycetech.com/showthread.php?tid=998 Mon, 25 Aug 2025 16:24:15 +0000 harveje]]> https://forums.spaycetech.com/showthread.php?tid=998 https://forums.spaycetech.com/showthread.php?tid=996 Sun, 24 Aug 2025 00:37:38 +0000 leandro.vitali]]> https://forums.spaycetech.com/showthread.php?tid=996
Has anyone here managed to get the ESS system working on the XC40 1.5 Hybrid R-Design 2020? I tried several options using OrBit, but none of them worked. I think this technology is really cool and I’d love to activate it on my car. If anyone has gone through this or has any tips, please share! Thanks.

]]>
Has anyone here managed to get the ESS system working on the XC40 1.5 Hybrid R-Design 2020? I tried several options using OrBit, but none of them worked. I think this technology is really cool and I’d love to activate it on my car. If anyone has gone through this or has any tips, please share! Thanks.

]]> https://forums.spaycetech.com/showthread.php?tid=989 Sun, 17 Aug 2025 07:17:20 +0000 JamesNotBond007]]> https://forums.spaycetech.com/showthread.php?tid=989 When turning on ignition it says to have intellisafe package and so far i have tested its self parking, 360deg cameras, lane keeping. All of those seem to work just fine. The car  is missing BLIS - the blind spot monitoring and the ACC. From what i've read here, the physical compatibility for ACC should be there, but what about the BLIS? The mirrors are definitely different because they are missing the led warning lights. But what else? Would it be possible to retrofit the BLIS on this car and what would I need for that, besided the mirrors?]]> When turning on ignition it says to have intellisafe package and so far i have tested its self parking, 360deg cameras, lane keeping. All of those seem to work just fine. The car  is missing BLIS - the blind spot monitoring and the ACC. From what i've read here, the physical compatibility for ACC should be there, but what about the BLIS? The mirrors are definitely different because they are missing the led warning lights. But what else? Would it be possible to retrofit the BLIS on this car and what would I need for that, besided the mirrors?]]> https://forums.spaycetech.com/showthread.php?tid=956 Wed, 16 Jul 2025 09:22:32 +0000 Helpful]]> https://forums.spaycetech.com/showthread.php?tid=956
Now I have a message that the passenger is always present in the seat.  I converted the European passenger seat and switched the passenger presence sensor from European to US, to a gel cushion.  I've already checked and it seems that the leather seat cushion cover (32357793) and the seat cushion foam (31498851) all match the American market. I've already completely disconnected the leather cover to relieve pressure on the sensor, but it didn't help. Only when I lift the seat cushion a little does the message about the passenger presence disappear, so the sensor is working. I kept installing the sensor from my old seats and the sensor still signals about the passenger. I disconnected the battery and waited, it didn't help either.


In the ECU Tools section in the SRS subsection there is a position #205D - occupant weight sensor (ows) calibration response#, its diagnosed but how do I run this calibration? Now when diagnosing (5B4C) there are no errors on the sensor but it shows that the sensor has "small weight".

How can I calibrate the occupant weight sensor (OWS)? Is such a calibration operation even possible? ]]>
Now I have a message that the passenger is always present in the seat.  I converted the European passenger seat and switched the passenger presence sensor from European to US, to a gel cushion.  I've already checked and it seems that the leather seat cushion cover (32357793) and the seat cushion foam (31498851) all match the American market. I've already completely disconnected the leather cover to relieve pressure on the sensor, but it didn't help. Only when I lift the seat cushion a little does the message about the passenger presence disappear, so the sensor is working. I kept installing the sensor from my old seats and the sensor still signals about the passenger. I disconnected the battery and waited, it didn't help either.


In the ECU Tools section in the SRS subsection there is a position #205D - occupant weight sensor (ows) calibration response#, its diagnosed but how do I run this calibration? Now when diagnosing (5B4C) there are no errors on the sensor but it shows that the sensor has "small weight".

How can I calibrate the occupant weight sensor (OWS)? Is such a calibration operation even possible? ]]>