https://forums.spaycetech.com/ Tue, 19 May 2026 01:55:08 +0000 MyBB https://forums.spaycetech.com/showthread.php?tid=1316 Mon, 11 May 2026 15:44:24 +0000 damachone]]> https://forums.spaycetech.com/showthread.php?tid=1316
I recently replaced the lower link on the rear right suspension height sensor on my 2017 S90.
I don't have air suspension, so this is only used for headlamp levelling.

I still get a DTC saying the value is out of range, and when I monitor the VDDM DIDs for front and rear height, the readings are very different and move in opposite directions when the vehicle height changes.

I was really hoping someone could check this on an S90 and tell me what "normal" looks like!

When I replaced the lower link, the "elbow" could go in two orientations, either towards the centre or outside of the vehicle and I am wondering if I picked the wrong one...

Any suggestions much appreciated!]]>
I recently replaced the lower link on the rear right suspension height sensor on my 2017 S90.
I don't have air suspension, so this is only used for headlamp levelling.

I still get a DTC saying the value is out of range, and when I monitor the VDDM DIDs for front and rear height, the readings are very different and move in opposite directions when the vehicle height changes.

I was really hoping someone could check this on an S90 and tell me what "normal" looks like!

When I replaced the lower link, the "elbow" could go in two orientations, either towards the centre or outside of the vehicle and I am wondering if I picked the wrong one...

Any suggestions much appreciated!]]> https://forums.spaycetech.com/showthread.php?tid=1177 Thu, 22 Jan 2026 08:02:55 +0000 hexaust]]> https://forums.spaycetech.com/showthread.php?tid=1177

Thanks!]]>

Thanks!]]> https://forums.spaycetech.com/showthread.php?tid=1160 Mon, 12 Jan 2026 08:00:59 +0000 zhaoshi8848]]> https://forums.spaycetech.com/showthread.php?tid=1160
  pic3.jpg (Size: 62.87 KB / Downloads: 58)

  pic2.jpg (Size: 208.62 KB / Downloads: 58)

  pic1.jpg (Size: 150.89 KB / Downloads: 58) ]]>
  pic3.jpg (Size: 62.87 KB / Downloads: 58)

  pic2.jpg (Size: 208.62 KB / Downloads: 58)

  pic1.jpg (Size: 150.89 KB / Downloads: 58) ]]> https://forums.spaycetech.com/showthread.php?tid=1036 Fri, 19 Sep 2025 21:30:46 +0000 bugarcek]]> https://forums.spaycetech.com/showthread.php?tid=1036 We have v90 with active shock absorbers

Now we changed them with normal one but now we have text for susspension error in dash.

I tried to change few things in configuration with orbit but no luck.

Any idea how to get rid off the message in dash?]]> We have v90 with active shock absorbers

Now we changed them with normal one but now we have text for susspension error in dash.

I tried to change few things in configuration with orbit but no luck.

Any idea how to get rid off the message in dash?]]> https://forums.spaycetech.com/showthread.php?tid=890 Sun, 25 May 2025 19:27:10 +0000 roorback]]> https://forums.spaycetech.com/showthread.php?tid=890 Is there a way to influence the exhaust flap control?
Normally it doesn't make any difference, but I have a Bastuck exhaust where one side is straight-through and the other side is dampened.
And the straight-through is pretty to loud, so I've adopted Volvo's exhaust flap control, but it behaves strangely without any logic (for example, it opens when you downshift a gear with the steering wheel buttons in ECO/PURE mode, etc.) - would be cool if there's a possibility to do this through Orbit?

greetings,
uwe]]> Is there a way to influence the exhaust flap control?
Normally it doesn't make any difference, but I have a Bastuck exhaust where one side is straight-through and the other side is dampened.
And the straight-through is pretty to loud, so I've adopted Volvo's exhaust flap control, but it behaves strangely without any logic (for example, it opens when you downshift a gear with the steering wheel buttons in ECO/PURE mode, etc.) - would be cool if there's a possibility to do this through Orbit?

greetings,
uwe]]> https://forums.spaycetech.com/showthread.php?tid=846 Sat, 12 Apr 2025 07:07:18 +0000 soots5]]> https://forums.spaycetech.com/showthread.php?tid=846 I have a 2020 v60.
Had my wheels changed for new ones.
Old tires were 225/50R17 with 17/7 ET40,5 wheels.

New ones are 235/50R17 with 17/7 ET 45 wheel.

Before everything were fine and car drove straight. Now it swims around the road but the difference is that I can feel how the car turns itself. Like sometimes right then left. Even turns uphill.
I can feel that it’s not about the road but the car itself turns where it wants.
It disappears when auto pilot is on.

Steering wheel changes about 2cm when it’s turning. And then it drives straight like normal.
Had wheel alignment done 4months ago. So it doesn't make sense that changing the wheels changes the alignment.
May the wheel and tire difference cause that.
Should I recalibrate something?

Thanks in advance]]> I have a 2020 v60.
Had my wheels changed for new ones.
Old tires were 225/50R17 with 17/7 ET40,5 wheels.

New ones are 235/50R17 with 17/7 ET 45 wheel.

Before everything were fine and car drove straight. Now it swims around the road but the difference is that I can feel how the car turns itself. Like sometimes right then left. Even turns uphill.
I can feel that it’s not about the road but the car itself turns where it wants.
It disappears when auto pilot is on.

Steering wheel changes about 2cm when it’s turning. And then it drives straight like normal.
Had wheel alignment done 4months ago. So it doesn't make sense that changing the wheels changes the alignment.
May the wheel and tire difference cause that.
Should I recalibrate something?

Thanks in advance]]> https://forums.spaycetech.com/showthread.php?tid=794 Sat, 15 Feb 2025 17:38:46 +0000 Folsom142]]> https://forums.spaycetech.com/showthread.php?tid=794 https://forums.spaycetech.com/showthread.php?tid=663 Tue, 19 Nov 2024 21:29:53 +0000 auto clinic]]> https://forums.spaycetech.com/showthread.php?tid=663 After changed it . The car show fault

SUM-U230051 
Central Configuration 
System Programming Failures
Not programmed

I bought new SUM module and installed it also I have this fault.

How can I program it ? Can I use Orbit for it ?]]> After changed it . The car show fault

SUM-U230051 
Central Configuration 
System Programming Failures
Not programmed

I bought new SUM module and installed it also I have this fault.

How can I program it ? Can I use Orbit for it ?]]> https://forums.spaycetech.com/showthread.php?tid=639 Thu, 31 Oct 2024 10:01:36 +0000 zhaoshi8848]]> https://forums.spaycetech.com/showthread.php?tid=639
  PIC 1.jpg (Size: 319.31 KB / Downloads: 217)

  PIC 2.jpg (Size: 321.38 KB / Downloads: 217)

  PIC 3.jpg (Size: 160.92 KB / Downloads: 214) ]]>
  PIC 1.jpg (Size: 319.31 KB / Downloads: 217)

  PIC 2.jpg (Size: 321.38 KB / Downloads: 217)

  PIC 3.jpg (Size: 160.92 KB / Downloads: 214) ]]> https://forums.spaycetech.com/showthread.php?tid=636 Wed, 30 Oct 2024 01:31:36 +0000 FastWgn]]> https://forums.spaycetech.com/showthread.php?tid=636 https://forums.spaycetech.com/showthread.php?tid=520 Fri, 12 Jul 2024 16:12:36 +0000 Elcinkayi]]> https://forums.spaycetech.com/showthread.php?tid=520
Anyone else's config looks like that or is my car shipped with something messed up?]]>
Anyone else's config looks like that or is my car shipped with something messed up?]]> https://forums.spaycetech.com/showthread.php?tid=473 Sun, 19 May 2024 18:15:20 +0000 TrstnBrtt]]> https://forums.spaycetech.com/showthread.php?tid=473 https://forums.spaycetech.com/showthread.php?tid=406 Sat, 16 Mar 2024 07:11:47 +0000 vcorusa]]> https://forums.spaycetech.com/showthread.php?tid=406 https://forums.spaycetech.com/showthread.php?tid=400 Sat, 09 Mar 2024 17:53:36 +0000 ASar97]]> https://forums.spaycetech.com/showthread.php?tid=400
steering rack was changed to new one and now i get PSCM error, car works fine autopilot is only what currently not work. 

is there possiblity to calibrate PSCM for that new steering rack?]]>
steering rack was changed to new one and now i get PSCM error, car works fine autopilot is only what currently not work. 

is there possiblity to calibrate PSCM for that new steering rack?]]> https://forums.spaycetech.com/showthread.php?tid=368 Wed, 21 Feb 2024 15:39:27 +0000 xc60P*]]> https://forums.spaycetech.com/showthread.php?tid=368 Do we know what the factory settings are for the xc60 polestar edition as to circumference for the 255/40/21 and the 265/35/22 OE ?

I'm guessing 7B for the 255/40/21 and 80 for the 265/35/22 ? No]]> Do we know what the factory settings are for the xc60 polestar edition as to circumference for the 255/40/21 and the 265/35/22 OE ?

I'm guessing 7B for the 255/40/21 and 80 for the 265/35/22 ? No]]>