https://forums.spaycetech.com/ Thu, 21 May 2026 01:30:25 +0000 MyBB https://forums.spaycetech.com/showthread.php?tid=1301 Mon, 04 May 2026 08:58:26 +0000 antonyn]]> https://forums.spaycetech.com/showthread.php?tid=1301
There is a difference between Creep On and Off so the modes are changing, but is there a config item that sets up Creep Off characteristics?
 (I cant see one on the ancient list from Sept 24 - but the conversations allude to more being added since)]]>
There is a difference between Creep On and Off so the modes are changing, but is there a config item that sets up Creep Off characteristics?
 (I cant see one on the ancient list from Sept 24 - but the conversations allude to more being added since)]]> https://forums.spaycetech.com/showthread.php?tid=1276 Sun, 05 Apr 2026 16:27:37 +0000 jos]]> https://forums.spaycetech.com/showthread.php?tid=1276
Today, I changed the configuration of my Volvo S60 B5 AWD Ultimate Dark MY23 (Volvo UX 5.0.5) for the first time.

These are the settings I modified:

• 043 Max Vehicle Speed Limitation from 180 to 250 (untested, not possible yet)
  
• 096 Audible Locking Feedback set to On (unfortunately not working) 
  
• 271 Start/Stop Function Memory set to “Button without memory, standard symbol” (I don’t know where to find the switch.
  The car still turns the engine on/off as expected with this setting, but where the hell is that switch/button in the menus?)
  
• 374 Polestar Level set to “Polestar optimized” (had a short drive, can’t say much yet). 
  

The flashing process completed successfully and everything looked good—there were some funny noises from the car during the read/write process. 
So, why isn’t the audible locking feedback working? I refer to this: https://forums.spaycetech.com/showthread...65#pid8665
And does anyone have an idea where to find the switch to turn the start/stop system off for the current drive? @BeachBoy?

Orbit ask for profile update (i had a virgin) so it updated and then my changes took place, flashing took about ~2 min afai remember right, everything was smooth.
My battery was only at 63% with 12,6V starting later around 12V, i had a lab power supply connected 13,6V at 20A, the power supply jumped two times from CC to CV so the car sucks a lot  


Best Regards JOS]]>
Today, I changed the configuration of my Volvo S60 B5 AWD Ultimate Dark MY23 (Volvo UX 5.0.5) for the first time.

These are the settings I modified:

• 043 Max Vehicle Speed Limitation from 180 to 250 (untested, not possible yet)
  
• 096 Audible Locking Feedback set to On (unfortunately not working) 
  
• 271 Start/Stop Function Memory set to “Button without memory, standard symbol” (I don’t know where to find the switch.
  The car still turns the engine on/off as expected with this setting, but where the hell is that switch/button in the menus?)
  
• 374 Polestar Level set to “Polestar optimized” (had a short drive, can’t say much yet). 
  

The flashing process completed successfully and everything looked good—there were some funny noises from the car during the read/write process. 
So, why isn’t the audible locking feedback working? I refer to this: https://forums.spaycetech.com/showthread...65#pid8665
And does anyone have an idea where to find the switch to turn the start/stop system off for the current drive? @BeachBoy?

Orbit ask for profile update (i had a virgin) so it updated and then my changes took place, flashing took about ~2 min afai remember right, everything was smooth.
My battery was only at 63% with 12,6V starting later around 12V, i had a lab power supply connected 13,6V at 20A, the power supply jumped two times from CC to CV so the car sucks a lot  


Best Regards JOS]]> https://forums.spaycetech.com/showthread.php?tid=1215 Mon, 16 Feb 2026 05:33:16 +0000 coreybrymer]]> https://forums.spaycetech.com/showthread.php?tid=1215
The error recieved with the latest version of Orbit, OrBit v1.2.3.2:  Error Reason: CEM refused our request for service SecurityAccess with code "IncorrectMessageLengthOrInvalidFormat" (0x13)

  Orbit Log Failure 2-15-2026.txt (Size: 33.45 KB / Downloads: 7) ]]>
The error recieved with the latest version of Orbit, OrBit v1.2.3.2:  Error Reason: CEM refused our request for service SecurityAccess with code "IncorrectMessageLengthOrInvalidFormat" (0x13)

  Orbit Log Failure 2-15-2026.txt (Size: 33.45 KB / Downloads: 7) ]]> https://forums.spaycetech.com/showthread.php?tid=1189 Fri, 30 Jan 2026 10:14:22 +0000 jos]]> https://forums.spaycetech.com/showthread.php?tid=1189
searching for others using Orbit with the same car, anyone around?


Best Regards]]>
searching for others using Orbit with the same car, anyone around?


Best Regards]]> https://forums.spaycetech.com/showthread.php?tid=1167 Mon, 26 Jan 2026 15:02:01 +0000 Pau1ey]]> https://forums.spaycetech.com/showthread.php?tid=1167 https://forums.spaycetech.com/showthread.php?tid=1155 Wed, 07 Jan 2026 17:21:32 +0000 SashaSolitaire]]> https://forums.spaycetech.com/showthread.php?tid=1155 https://forums.spaycetech.com/showthread.php?tid=1122 Mon, 01 Dec 2025 09:15:44 +0000 siccagm]]> https://forums.spaycetech.com/showthread.php?tid=1122 Thank you for the tool and the amazing work. 
Some of us in europe have not very high purchasing power, it could be great if you can activate 4x Paypal payment so we can buy the tool without screwing the budget  (225$ is 1/10 of our household income lol). I got my volvo used and high mileage for cheap and we do maintainance ourselves.
Thank you in advance.]]> Thank you for the tool and the amazing work. 
Some of us in europe have not very high purchasing power, it could be great if you can activate 4x Paypal payment so we can buy the tool without screwing the budget  (225$ is 1/10 of our household income lol). I got my volvo used and high mileage for cheap and we do maintainance ourselves.
Thank you in advance.]]> https://forums.spaycetech.com/showthread.php?tid=1002 Wed, 27 Aug 2025 05:21:52 +0000 jjogola]]> https://forums.spaycetech.com/showthread.php?tid=1002
How does one get in touch with support? The emails are not being delivered. Is there any other way to get in touch with them?]]>
How does one get in touch with support? The emails are not being delivered. Is there any other way to get in touch with them?]]> https://forums.spaycetech.com/showthread.php?tid=942 Tue, 01 Jul 2025 21:58:17 +0000 Sasquatch]]> https://forums.spaycetech.com/showthread.php?tid=942 I just did the upgrade in hope to get usable bluetooth, physical buttons and steering assit...
Now I can chnge config to my heart's content, it has 0 effect on avialiable functions. 
bye bye adaptuve cruise control...
i guess they didn't put it in 5k "upgrade" pack to let some clever shmut get it for $343-ish Orbit did cost me with pin unlocks and cable....

not a happy bunny 
not only car runs on jokeware that makes windows Vista look like nuclear facility grade stability wise....now i can't even turn my prefered options on and off.
f*$@ck them , my first and last car from volvo/polestar, should've gone with KIA again !!! better build, better progrmmed and cheaper too!]]> I just did the upgrade in hope to get usable bluetooth, physical buttons and steering assit...
Now I can chnge config to my heart's content, it has 0 effect on avialiable functions. 
bye bye adaptuve cruise control...
i guess they didn't put it in 5k "upgrade" pack to let some clever shmut get it for $343-ish Orbit did cost me with pin unlocks and cable....

not a happy bunny 
not only car runs on jokeware that makes windows Vista look like nuclear facility grade stability wise....now i can't even turn my prefered options on and off.
f*$@ck them , my first and last car from volvo/polestar, should've gone with KIA again !!! better build, better progrmmed and cheaper too!]]> https://forums.spaycetech.com/showthread.php?tid=892 Wed, 28 May 2025 17:58:24 +0000 przem219]]> https://forums.spaycetech.com/showthread.php?tid=892 (I had a problem with the radiator fan and Orbit does not show errors, other scanner so it was an expected error)]]> (I had a problem with the radiator fan and Orbit does not show errors, other scanner so it was an expected error)]]> https://forums.spaycetech.com/showthread.php?tid=854 Fri, 18 Apr 2025 16:37:06 +0000 TaKu88]]> https://forums.spaycetech.com/showthread.php?tid=854 Possibility to change the dir where the log file is being saved.Mostly I use tablet for diagnosing and put the diag logs to cloud so they will be available from other computers without sending them.
I know theres "main" log , but would be nice to have possibility to save the log with one click  for the currently scanned car including VIN,milage,date and errors ( possibility to change date/time format, bc living in europe)
Maybe a "profile" page ,where u can see how many days of subscription is available, VINs added- cem pin etc.Doesnt have to be in the app itself, can be on the web with possibility to extend subscription or add VIN-s
Dumb proof configurations: not completely sure how volvos works yet ,but for example if some configuration need some extra hardware, then would get notification.Like would get a warning if im trying to change AUD conf to B&O but he HW is for basic audio.
Also like little notification somewhere if u have changes made what u have to rewert before going to dealership.
Battery voltage visible all the time.

Forums:
Maybe some forums only for users who have the subscription or donate to the developers? Been some forums where if u dont have the tool or confirmed subsciption,then u r not getting support. Also posts with any other diag programs wil get ban or posts deleted.]]> Possibility to change the dir where the log file is being saved.Mostly I use tablet for diagnosing and put the diag logs to cloud so they will be available from other computers without sending them.
I know theres "main" log , but would be nice to have possibility to save the log with one click  for the currently scanned car including VIN,milage,date and errors ( possibility to change date/time format, bc living in europe)
Maybe a "profile" page ,where u can see how many days of subscription is available, VINs added- cem pin etc.Doesnt have to be in the app itself, can be on the web with possibility to extend subscription or add VIN-s
Dumb proof configurations: not completely sure how volvos works yet ,but for example if some configuration need some extra hardware, then would get notification.Like would get a warning if im trying to change AUD conf to B&O but he HW is for basic audio.
Also like little notification somewhere if u have changes made what u have to rewert before going to dealership.
Battery voltage visible all the time.

Forums:
Maybe some forums only for users who have the subscription or donate to the developers? Been some forums where if u dont have the tool or confirmed subsciption,then u r not getting support. Also posts with any other diag programs wil get ban or posts deleted.]]> https://forums.spaycetech.com/showthread.php?tid=772 Tue, 04 Feb 2025 17:23:19 +0000 88keys]]> https://forums.spaycetech.com/showthread.php?tid=772
Thanks in advance for looking at this!

Trying to troubleshoot an annoying problem with my xc40 recharge (Android, my22). Ever since upgrading the software to 3.3.16 (which I did according to the instructions, first restoring to OEM and then upgrading), I have been receiving two warning errors when I add autopilot and adaptive high beams with Orbit. 


 The first error is "the collision avoidance system is unavailable" and the second is "headlight system is malfunctioning." See attached photos of the errors and the dash. 

At first, I thought this might be a sensor or hardware issue, so in preparation to bring the vehicle into the dealer for service, I again restored the software to OEM. Initially the errors persisted, but by the end of the 20-minute drive to the dealer they had all cleared up. The mechanic spent all day looking for errors and could find none, not even anything recorded in the computer. He went ahead and wiped the computer and reloaded all the software, and the car was working fine when I got it back. 

After a week of driving it OEM, error-free, I again uploaded the autopilot and adaptive high beams mods through orbit. Once again the errors popped up almost immediately. 

Anyone else have this issue? Any ideas on what could be causing the problem? 

Many thanks to everyone for their insights!

  PXL_20250204_171706547.jpg (Size: 990.9 KB / Downloads: 147)

  PXL_20250204_171701024.jpg (Size: 968.61 KB / Downloads: 146)

  PXL_20250204_171926482.jpg (Size: 312.55 KB / Downloads: 144) ]]>
Thanks in advance for looking at this!

Trying to troubleshoot an annoying problem with my xc40 recharge (Android, my22). Ever since upgrading the software to 3.3.16 (which I did according to the instructions, first restoring to OEM and then upgrading), I have been receiving two warning errors when I add autopilot and adaptive high beams with Orbit. 


 The first error is "the collision avoidance system is unavailable" and the second is "headlight system is malfunctioning." See attached photos of the errors and the dash. 

At first, I thought this might be a sensor or hardware issue, so in preparation to bring the vehicle into the dealer for service, I again restored the software to OEM. Initially the errors persisted, but by the end of the 20-minute drive to the dealer they had all cleared up. The mechanic spent all day looking for errors and could find none, not even anything recorded in the computer. He went ahead and wiped the computer and reloaded all the software, and the car was working fine when I got it back. 

After a week of driving it OEM, error-free, I again uploaded the autopilot and adaptive high beams mods through orbit. Once again the errors popped up almost immediately. 

Anyone else have this issue? Any ideas on what could be causing the problem? 

Many thanks to everyone for their insights!

  PXL_20250204_171706547.jpg (Size: 990.9 KB / Downloads: 147)

  PXL_20250204_171701024.jpg (Size: 968.61 KB / Downloads: 146)

  PXL_20250204_171926482.jpg (Size: 312.55 KB / Downloads: 144) ]]> https://forums.spaycetech.com/showthread.php?tid=667 Sat, 23 Nov 2024 03:48:54 +0000 halochen]]> https://forums.spaycetech.com/showthread.php?tid=667
  无标题.jpg (Size: 54.84 KB / Downloads: 43) ]]>
  无标题.jpg (Size: 54.84 KB / Downloads: 43) ]]> https://forums.spaycetech.com/showthread.php?tid=594 Sat, 07 Sep 2024 11:46:03 +0000 nbvolks]]> https://forums.spaycetech.com/showthread.php?tid=594 https://forums.spaycetech.com/showthread.php?tid=593 Fri, 06 Sep 2024 16:48:49 +0000 LtYoung]]> https://forums.spaycetech.com/showthread.php?tid=593
I know we're supposed to be out of the muddy waters that is flash failures causing IHU to be stuck since P/V 3.1.9. Yesterday when I tried to reflash my config after taking the car from the dealer (still on 3.1.9, I don't even think they hooked the car up to VIDA to begin with), my first attempt failed. 

1. Orbits goes to check programming ready on all ECUs (all lights out and IHU fan spinning at max)
2. Almost immediately everything came to life like a flash has ended, but the CSD stays off and IHU fan stuck at full.
3. Orbits reports flash not ready and aborted.
4. Tried flash again (IHU fan still max), failed ECU programming ready checks, aborted.
5. Manually sent a reset in the ECU tab to the IHU, the fans stopped spinning. A bit later CSD booted up.
6. Flashed again and things went as normal.

Could be just a glitch for god knows what, but I have been kind of nervous since the 3.0.3 roller coaster. Figured it's useful to let everyone know try the reset command on the IHU if this happens to you.]]>
I know we're supposed to be out of the muddy waters that is flash failures causing IHU to be stuck since P/V 3.1.9. Yesterday when I tried to reflash my config after taking the car from the dealer (still on 3.1.9, I don't even think they hooked the car up to VIDA to begin with), my first attempt failed. 

1. Orbits goes to check programming ready on all ECUs (all lights out and IHU fan spinning at max)
2. Almost immediately everything came to life like a flash has ended, but the CSD stays off and IHU fan stuck at full.
3. Orbits reports flash not ready and aborted.
4. Tried flash again (IHU fan still max), failed ECU programming ready checks, aborted.
5. Manually sent a reset in the ECU tab to the IHU, the fans stopped spinning. A bit later CSD booted up.
6. Flashed again and things went as normal.

Could be just a glitch for god knows what, but I have been kind of nervous since the 3.0.3 roller coaster. Figured it's useful to let everyone know try the reset command on the IHU if this happens to you.]]>