Posts: 11
Threads: 6
Joined: Jul 2024
Reputation:
0
11-25-2024, 07:14 PM
Hi
I recently cracked my headlight and purchased one like new but from China and they send me the headlight work the wrong controller. I know now which is the correct controller (cost around 500) I still need to do HCM reload but that's i believe a separate issue..my question if if I need to purchase the correct module or can orbit help to reprogram work the wrong one ?
Posts: 584
Threads: 8
Joined: Feb 2023
Reputation:
53
It looks like it is different for models and year.
I retrofitted bendy lights to my s60 2019. Replaced both headlights (full led) and two used HCM (labeled H for bendy lights). Andrew provided me the software for both sides and flashed with Orbit.
Then, I restored all the config to OEM and connected the car to VIDA with the retrofitted used headlights and HCM modules. VIDA had detected the retrofitted HCMs and had forced me to do reload before letting me to perform total upgrade on June 2024.
I purchased HCM reload from VIDA and it did flashed both used HCMs on my car, Then I could perform the total upgrade.
However, I had to reflash both headlights afterwards with Orbit. Because after VIDA HCM reload headlights did not work properly.
During the VIDA software reload I did not reload them one side at a time which would require to purchase reload software two times. (one for each side)
There are 5 options when reloading HCMs via VIDA and I had chosen 5 to save money.
1) Headlight Left replacement
2) Headlight Left replacement with controller
3) Headlight right replacement
4) Headlight right replacement with controller
5) Only HCMs (Left and right)
Options 1 to 4 requires additional information (headlight assembly production date and HEX numbers on the sticker) to be entered during reload process.
Option 5 is just straight forward without any headlight assembly info).
Now, I do not know why R1maS could not reload the used module with VIDA. But there are two possibilities.
1) Faulty used ECU
2) Used ECU part number does match to the VIN's part catalog.
One thing is very important when using used parts with volvo.
The used part number itself must be listed as "FIT" to VIN. or the used part number must be Supersession(s) of the new part number that fits to the VIN.
Example: Used HCM part number is 31427776 (labeled High) and original one was 31427787 (labeled MID). Both parts are in the parts catalog for my VIN.
Posts: 62
Threads: 5
Joined: Feb 2023
Reputation:
1
11-28-2024, 09:37 AM
(This post was last modified: 11-28-2024, 11:47 AM by R1maS.)
@IMAY2023 the things with new modules from 2023 are different - they have - as Andrew said - 'signed software' and there is no possibility to do reload used modules. I know this, because had such a case this summer. We played with Andrew connected directly to the car and the only possibility for that car was to buy brand new module from Volvo. Here is part of our conversation with Andrew:
[...
Andrew:
I hope there is a way to support used module replacement for these non security critical modules...for Volvo to essentially "serialize" the hardware with software signatures...so you can only buy new hardware from Volvo...that would be quite a pain!
Me:
you mean, that it probably not possible to reprogram these modules? But for XC40 we did it... Or Polestar has different?
Andrew:
Not knowing what each car has, off the top of my head, but I know in previous years, it was not a problem, HCMs did not use signed software. But this 2023 Polestar, is using the HCMs with signed software. So it is something "new" if that makes sense.
...]