3 hours ago
You do not need any relays, fuses at all. Fog lights including cornering lights are controlled by the CEM.
Your current pumber harness should have the fog light connectors and the wiring up to the harness connector behind the driver side plastic cover.
You need three wires from that connector. Ground, left and right positive.
For Ground, you can take it from any ground connector on the body.
Two positive wires goes to the CEM.
all the info you need is in this thread. https://forums.spaycetech.com/showthread...fog+lights
Your current pumber harness should have the fog light connectors and the wiring up to the harness connector behind the driver side plastic cover.
You need three wires from that connector. Ground, left and right positive.
For Ground, you can take it from any ground connector on the body.
Two positive wires goes to the CEM.
all the info you need is in this thread. https://forums.spaycetech.com/showthread...fog+lights